From owner-fsj-digest-at-digest.net Mon Jan 24 07:08:43 2005 From: fsj-digest fsj-digest Monday, January 24 2005 Volume 01 : Number 2346 Forum for Discussion of Full Sized SJ Series Jeeps Brian Colucci Digest Coordinator Contents: Re: fsj: wiring harnesses fsj: Re: Re: wiring harnesses fsj: Re: Re: Re: wiring harnesses fsj: Re: Re: Re: Re: wiring harnesses fsj: question on AMC V8's fsj: Re: question on AMC V8's fsj: Re: question on AMC V8's fsj: Re: Re: question on AMC V8's Re: fsj: Re: Re: Re: Re: wiring harnesses Re: fsj: Re: Re: Re: Re: wiring harnesses FSJ Digest Home Page: http://www.digest.net/jeeps/fsj/ Send submissions to fsj-digest-at-digest.net Send administrative requests to fsj-digest-request-at-digest.net To unsubscribe, include the word unsubscribe by itself in the body of the message, unless you are sending the request from a different address than the one that appears on the list. Include the word help in a message to fsj-digest-request to get a list of other majordomo commands. ---------------------------------------------------------------------- Date: Sun, 23 Jan 2005 17:55:42 -0500 From: "Neal Hoover" Subject: Re: fsj: wiring harnesses thanks for the link. but i already have an FSM for my model year. :) Neal A. Hoover Project '76 J-10 Project '96 XJ http://community.webshots.com/user/proj96xj - ----- Original Message ----- From: To: ; Sent: Saturday, January 22, 2005 10:05 PM Subject: Re: fsj: wiring harnesses > nope, but this may help after you find it..Tom 'Oljeep' Collins FSJ Wiring > Page > - ---------------------------------------------------------------------------- - -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 ------------------------------ Date: Sun, 23 Jan 2005 17:57:56 -0500 From: "Neal Hoover" Subject: fsj: Re: Re: wiring harnesses zack and i had a bit of a falling out after i got those cruddy bed sides from him. i was hoping that i could find something somewhere else. at a last resort, i was thinking of rewiring it all myself, but i'd have to locate a source for all of the plug couplers at a decent price. any ideas there? Neal A. Hoover Project '76 J-10 Project '96 XJ http://community.webshots.com/user/proj96xj - ----- Original Message ----- From: "Jim Blair" To: "Neal Hoover" ; "1L" Sent: Saturday, January 22, 2005 11:25 PM Subject: fsj: Re: wiring harnesses > Last I checked, http://www.zmjeeps.com was doing them up. I have the stock > engine bay harness from a 6 cyl '80 Cherokee that is unmolested I am going > to sell. That is pre-computer BBD carb (last year) > > > > neal wrote: > anybody know of a good source for a cab and/or engine bay wiring harness for > j-trucks? i'd like to get one that has upgraded wire gauges from the > factory originals. > painless?, etc..... > > thanks. > > Neal A. Hoover > Project '76 J-10 > Project '96 XJ > http://community.webshots.com/user/proj96xj > > > > > -- > No virus found in this outgoing message. > Checked by AVG Anti-Virus. > Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 > > - -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 ------------------------------ Date: Sun, 23 Jan 2005 16:31:49 -0800 From: "Jim Blair" Subject: fsj: Re: Re: Re: wiring harnesses A: Tough call. I sort of recall the bedside issue, but like most companies starting out, the product is supposed to have been improved since then. (he just sold what others were building and I have noticed that attitude is everything when dealing with suppliers) Maybe http://www.BJsoffroad.com is getting into the game? The connectors are getting tougher to find. www.Painlesswiring.com is supposed to have universal harnesses. Neal wrote: zack and i had a bit of a falling out after i got those cruddy bed sides from him. i was hoping that i could find something somewhere else. at a last resort, i was thinking of rewiring it all myself, but i'd have to locate a source for all of the plug couplers at a decent price. any ideas there? Neal A. Hoover Project '76 J-10 Project '96 XJ http://community.webshots.com/user/proj96xj - ----- Original Message ----- From: "Jim Blair" To: "Neal Hoover" ; "1L" Sent: Saturday, January 22, 2005 11:25 PM Subject: fsj: Re: wiring harnesses > Last I checked, http://www.zmjeeps.com was doing them up. I have the stock > engine bay harness from a 6 cyl '80 Cherokee that is unmolested I am going > to sell. That is pre-computer BBD carb (last year) > > > > neal wrote: > anybody know of a good source for a cab and/or engine bay wiring harness for > j-trucks? i'd like to get one that has upgraded wire gauges from the > factory originals. > painless?, etc..... > > thanks. > > Neal A. Hoover > Project '76 J-10 > Project '96 XJ > http://community.webshots.com/user/proj96xj > > > > > -- > No virus found in this outgoing message. > Checked by AVG Anti-Virus. > Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 > > - -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 ------------------------------ Date: Sun, 23 Jan 2005 22:54:21 -0500 From: "Neal Hoover" Subject: fsj: Re: Re: Re: Re: wiring harnesses i'm thinking of calling up painless and asking them about using a harness for a CJ-8 with a V8 motor. i'd think that should work fine as long as the fuse block, etc fits into the hole in the firewall. anyone ever done that before? Neal A. Hoover Project '76 J-10 Project '96 XJ http://community.webshots.com/user/proj96xj - ----- Original Message ----- From: "Jim Blair" To: "Neal Hoover" ; "1L" Sent: Sunday, January 23, 2005 7:31 PM Subject: fsj: Re: Re: Re: wiring harnesses > A: Tough call. I sort of recall the bedside issue, but like most companies > starting out, the product is supposed to have been improved since then. (he > just sold what others were building and I have noticed that attitude is > everything when dealing with suppliers) Maybe http://www.BJsoffroad.com is > getting into the game? The connectors are getting tougher to find. > www.Painlesswiring.com is supposed to have universal harnesses. > > > Neal wrote: > zack and i had a bit of a falling out after i got those cruddy bed sides > from him. > i was hoping that i could find something somewhere else. > > at a last resort, i was thinking of rewiring it all myself, but i'd have to > locate a source for all of the plug couplers at a decent price. any ideas > there? > > Neal A. Hoover > Project '76 J-10 > Project '96 XJ > http://community.webshots.com/user/proj96xj > ----- Original Message ----- > From: "Jim Blair" > To: "Neal Hoover" ; "1L" > Sent: Saturday, January 22, 2005 11:25 PM > Subject: fsj: Re: wiring harnesses > > > > Last I checked, http://www.zmjeeps.com was doing them up. I have the stock > > engine bay harness from a 6 cyl '80 Cherokee that is unmolested I am going > > to sell. That is pre-computer BBD carb (last year) > > > > > > > > neal wrote: > > anybody know of a good source for a cab and/or engine bay wiring harness > for > > j-trucks? i'd like to get one that has upgraded wire gauges from the > > factory originals. > > painless?, etc..... > > > > thanks. > > > > Neal A. Hoover > > Project '76 J-10 > > Project '96 XJ > > http://community.webshots.com/user/proj96xj > > > > > > > > > > -- > > No virus found in this outgoing message. > > Checked by AVG Anti-Virus. > > Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 > > > > > > -- > > No virus found in this incoming message. > > Checked by AVG Anti-Virus. > > Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 > > > > > > > > > -- > No virus found in this outgoing message. > Checked by AVG Anti-Virus. > Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 > > - -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 ------------------------------ Date: Sun, 23 Jan 2005 20:23:06 -0800 (PST) From: john Subject: fsj: question on AMC V8's On AMC V8's is the displacement stamped on the block? If so, where? We're trying to decide if a V8 a friend has that he said came out of of a '72 AMX/Javelin is really a 343 or not... since my books show the 343 only for '69... How many times have you heard someone say that this Jeep has a 401 in it? ;) john ---- - ------------------------------------------------------------------------- ** http://wagoneers.com ** ** http://freegift.net ** Snohomish, Washington USA - where Jeeps don't rust, they mold. - ------------------------------------------------------------------------- ------------------------------ Date: Sun, 23 Jan 2005 23:59:05 -0500 From: "Neal Hoover" Subject: fsj: Re: question on AMC V8's um... yup. it's embossed on the bottom of the block right below the motor mounts. i'd think that you would have already been privy to that little bit of info, John! ;) Neal A. Hoover Project '76 J-10 Project '96 XJ http://community.webshots.com/user/proj96xj - ----- Original Message ----- From: "john" To: "full size jeep list" ; "xj-list" Sent: Sunday, January 23, 2005 11:23 PM Subject: fsj: question on AMC V8's > On AMC V8's is the displacement stamped on the block? > If so, where? > > We're trying to decide if a V8 a friend has that he said came out of > of a '72 AMX/Javelin is really a 343 or not... since my books show > the 343 only for '69... > > How many times have you heard someone say that this Jeep has a 401 in it? ;) > > john > > ---- > > ------------------------------------------------------------------------- > ** http://wagoneers.com ** ** http://freegift.net ** > Snohomish, Washington USA - where Jeeps don't rust, they mold. > ------------------------------------------------------------------------- > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 > > - -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 ------------------------------ Date: Sun, 23 Jan 2005 20:36:13 -0800 (PST) From: john Subject: fsj: Re: question on AMC V8's well, I believe that I've seen it with my own eyes, but the 343 is an odd duck and it's being found in a car three years newer than it's supposed to be... :) so, the question is really, if it's really a 343, how'd it get in that car? ;) I'm kind of expecting it to really be a 304, 360 or perhaps a 401... we'll see. ;) tomorrow... :) john On Sun, 23 Jan 2005, Neal Hoover wrote: >-->um... yup. >-->it's embossed on the bottom of the block right below the motor mounts. >-->i'd think that you would have already been privy to that little bit of info, >-->John! >-->;) >--> >-->Neal A. Hoover >-->Project '76 J-10 >-->Project '96 XJ >-->http://community.webshots.com/user/proj96xj >-->----- Original Message ----- >-->From: "john" >-->To: "full size jeep list" ; "xj-list" >-->Sent: Sunday, January 23, 2005 11:23 PM >-->Subject: fsj: question on AMC V8's >--> >--> >-->> On AMC V8's is the displacement stamped on the block? >-->> If so, where? >-->> >-->> We're trying to decide if a V8 a friend has that he said came out of >-->> of a '72 AMX/Javelin is really a 343 or not... since my books show >-->> the 343 only for '69... >-->> >-->> How many times have you heard someone say that this Jeep has a 401 in it? >-->;) >-->> >-->> john >-->> >-->> ---- >-->> >-->> ------------------------------------------------------------------------- >-->> ** http://wagoneers.com ** ** http://freegift.net ** >-->> Snohomish, Washington USA - where Jeeps don't rust, they mold. >-->> ------------------------------------------------------------------------- >-->> >-->> >-->> -- >-->> No virus found in this incoming message. >-->> Checked by AVG Anti-Virus. >-->> Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 >-->> >-->> >--> >--> >--> >--> >-->-- >-->No virus found in this outgoing message. >-->Checked by AVG Anti-Virus. >-->Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 >--> ---- - ------------------------------------------------------------------------- ** http://wagoneers.com ** ** http://freegift.net ** Snohomish, Washington USA - where Jeeps don't rust, they mold. - ------------------------------------------------------------------------- ------------------------------ Date: Mon, 24 Jan 2005 00:06:54 -0500 From: "Neal Hoover" Subject: fsj: Re: Re: question on AMC V8's should be intersting to see what you find out. let us know! Neal A. Hoover Project '76 J-10 Project '96 XJ http://community.webshots.com/user/proj96xj - ----- Original Message ----- From: "john" To: "Neal Hoover" Cc: "full size jeep list" ; "xj-list" Sent: Sunday, January 23, 2005 11:36 PM Subject: fsj: Re: question on AMC V8's > well, I believe that I've seen it with my own eyes, > but the 343 is an odd duck and it's being found in a car > three years newer than it's supposed to be... :) > > so, the question is really, if it's really a 343, how'd > it get in that car? ;) I'm kind of expecting it > to really be a 304, 360 or perhaps a 401... we'll see. ;) > > tomorrow... :) > > john > > On Sun, 23 Jan 2005, Neal Hoover wrote: > > >-->um... yup. > >-->it's embossed on the bottom of the block right below the motor mounts. > >-->i'd think that you would have already been privy to that little bit of info, > >-->John! > >-->;) > >--> > >-->Neal A. Hoover > >-->Project '76 J-10 > >-->Project '96 XJ > >-->http://community.webshots.com/user/proj96xj > >-->----- Original Message ----- > >-->From: "john" > >-->To: "full size jeep list" ; "xj-list" > >-->Sent: Sunday, January 23, 2005 11:23 PM > >-->Subject: fsj: question on AMC V8's > >--> > >--> > >-->> On AMC V8's is the displacement stamped on the block? > >-->> If so, where? > >-->> > >-->> We're trying to decide if a V8 a friend has that he said came out of > >-->> of a '72 AMX/Javelin is really a 343 or not... since my books show > >-->> the 343 only for '69... > >-->> > >-->> How many times have you heard someone say that this Jeep has a 401 in it? > >-->;) > >-->> > >-->> john > >-->> > >-->> ---- > >-->> > >-->> ---------------------------------------------------------------------- - --- > >-->> ** http://wagoneers.com ** ** http://freegift.net ** > >-->> Snohomish, Washington USA - where Jeeps don't rust, they mold. > >-->> ---------------------------------------------------------------------- - --- > >-->> > >-->> > >-->> -- > >-->> No virus found in this incoming message. > >-->> Checked by AVG Anti-Virus. > >-->> Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 > >-->> > >-->> > >--> > >--> > >--> > >--> > >-->-- > >-->No virus found in this outgoing message. > >-->Checked by AVG Anti-Virus. > >-->Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 > >--> > > ---- > > ------------------------------------------------------------------------- > ** http://wagoneers.com ** ** http://freegift.net ** > Snohomish, Washington USA - where Jeeps don't rust, they mold. > ------------------------------------------------------------------------- > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 > > - -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 ------------------------------ Date: Sun, 23 Jan 2005 22:03:31 -0800 From: john meister Subject: Re: fsj: Re: Re: Re: Re: wiring harnesses why not make your own? when I got my first FSJ that's what I did... painless didn't exist back then... I just cut the wires on the back of whatever the device was, figured out where it was supposed to go, along with all it's closest friends, laid out the wire in my garage, wrapped it up into my own harness and pulled it through, then reconnected it up to whatever device... :) worked great... ya'll wimpin' out buyin' harnesses... it's unheard of... and you, you of all people, should be ashamed of yourself for suggesting the idea of buying a harness... ain't ya been paying attention? jeeps be built, not bought. ;) rofl... give me grief about the block stampings will ya... ha! ;) rofl... john - ------------------------------------------------------------------------- ** http://wagoneers.com ** ** http://freegift.net ** sent via Thunderbird in SUSE 9.2 Linux - virus/worm free Snohomish, Washington USA - where Jeeps don't rust, they mold. - ------------------------------------------------------------------------- Neal Hoover wrote: > i'm thinking of calling up painless and asking them about using a harness > for a CJ-8 with a V8 motor. i'd think that should work fine as long as the > fuse block, etc fits into the hole in the firewall. > anyone ever done that before? > > Neal A. Hoover > Project '76 J-10 > Project '96 XJ > http://community.webshots.com/user/proj96xj > ----- Original Message ----- > From: "Jim Blair" > To: "Neal Hoover" ; "1L" > Sent: Sunday, January 23, 2005 7:31 PM > Subject: fsj: Re: Re: Re: wiring harnesses > > > >>A: Tough call. I sort of recall the bedside issue, but like most companies >>starting out, the product is supposed to have been improved since then. > > (he > >>just sold what others were building and I have noticed that attitude is >>everything when dealing with suppliers) Maybe http://www.BJsoffroad.com is >>getting into the game? The connectors are getting tougher to find. >>www.Painlesswiring.com is supposed to have universal harnesses. >> >> >>Neal wrote: >>zack and i had a bit of a falling out after i got those cruddy bed sides >>from him. >>i was hoping that i could find something somewhere else. >> >>at a last resort, i was thinking of rewiring it all myself, but i'd have > > to > >>locate a source for all of the plug couplers at a decent price. any ideas >>there? >> >>Neal A. Hoover >>Project '76 J-10 >>Project '96 XJ >>http://community.webshots.com/user/proj96xj >>----- Original Message ----- >>From: "Jim Blair" >>To: "Neal Hoover" ; "1L" >>Sent: Saturday, January 22, 2005 11:25 PM >>Subject: fsj: Re: wiring harnesses >> >> >> >>>Last I checked, http://www.zmjeeps.com was doing them up. I have the > > stock > >>>engine bay harness from a 6 cyl '80 Cherokee that is unmolested I am > > going > >>>to sell. That is pre-computer BBD carb (last year) >>> >>> >>> >>>neal wrote: >>>anybody know of a good source for a cab and/or engine bay wiring harness >> >>for >> >>>j-trucks? i'd like to get one that has upgraded wire gauges from the >>>factory originals. >>>painless?, etc..... >>> >>>thanks. >>> >>>Neal A. Hoover >>>Project '76 J-10 >>>Project '96 XJ >>>http://community.webshots.com/user/proj96xj >>> >>> >>> >>> >>>-- >>>No virus found in this outgoing message. >>>Checked by AVG Anti-Virus. >>>Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 >>> >>> >>>-- >>>No virus found in this incoming message. >>>Checked by AVG Anti-Virus. >>>Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 >>> >>> >> >> >> >> >>-- >>No virus found in this outgoing message. >>Checked by AVG Anti-Virus. >>Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 >> >> >>-- >>No virus found in this incoming message. >>Checked by AVG Anti-Virus. >>Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 ------------------------------ Date: Mon, 24 Jan 2005 07:11:53 -0500 From: "Neal Hoover" Subject: Re: fsj: Re: Re: Re: Re: wiring harnesses wooooo, boy! 'little snippy today, are we? ;) it's all about time, my friend. cutting, splicing, and soldering all of those connections you're talking about could take DAYS! and i'd *still* be using 30 year-old connectors. i'm looking for the quickest, cheapest, and most effective way out. i'd almost venture to guess that the Painless route would be just as cheap as buying my own wire, connectors, and fuse block and doing it myself. and a heck of a lot faster. Neal A. Hoover Project '76 J-10 Project '96 XJ http://community.webshots.com/user/proj96xj - ----- Original Message ----- From: "john meister" To: "Neal Hoover" Cc: "Jim Blair" ; "1L" Sent: Monday, January 24, 2005 1:03 AM Subject: Re: fsj: Re: Re: Re: Re: wiring harnesses > why not make your own? when I got my first FSJ that's what I > did... painless didn't exist back then... I just cut the wires > on the back of whatever the device was, figured out where it > was supposed to go, along with all it's closest friends, laid out > the wire in my garage, wrapped it up into my own harness and pulled > it through, then reconnected it up to whatever device... :) worked > great... ya'll wimpin' out buyin' harnesses... it's unheard of... and > you, you of all people, should be ashamed of yourself for suggesting > the idea of buying a harness... ain't ya been paying attention? jeeps > be built, not bought. ;) rofl... > > give me grief about the block stampings will ya... ha! ;) rofl... > > john > ------------------------------------------------------------------------- > ** http://wagoneers.com ** ** http://freegift.net ** > sent via Thunderbird in SUSE 9.2 Linux - virus/worm free > Snohomish, Washington USA - where Jeeps don't rust, they mold. > ------------------------------------------------------------------------- > > > > Neal Hoover wrote: > > i'm thinking of calling up painless and asking them about using a harness > > for a CJ-8 with a V8 motor. i'd think that should work fine as long as the > > fuse block, etc fits into the hole in the firewall. > > anyone ever done that before? > > > > Neal A. Hoover > > Project '76 J-10 > > Project '96 XJ > > http://community.webshots.com/user/proj96xj > > ----- Original Message ----- > > From: "Jim Blair" > > To: "Neal Hoover" ; "1L" > > Sent: Sunday, January 23, 2005 7:31 PM > > Subject: fsj: Re: Re: Re: wiring harnesses > > > > > > > >>A: Tough call. I sort of recall the bedside issue, but like most companies > >>starting out, the product is supposed to have been improved since then. > > > > (he > > > >>just sold what others were building and I have noticed that attitude is > >>everything when dealing with suppliers) Maybe http://www.BJsoffroad.com is > >>getting into the game? The connectors are getting tougher to find. > >>www.Painlesswiring.com is supposed to have universal harnesses. > >> > >> > >>Neal wrote: > >>zack and i had a bit of a falling out after i got those cruddy bed sides > >>from him. > >>i was hoping that i could find something somewhere else. > >> > >>at a last resort, i was thinking of rewiring it all myself, but i'd have > > > > to > > > >>locate a source for all of the plug couplers at a decent price. any ideas > >>there? > >> > >>Neal A. Hoover > >>Project '76 J-10 > >>Project '96 XJ > >>http://community.webshots.com/user/proj96xj > >>----- Original Message ----- > >>From: "Jim Blair" > >>To: "Neal Hoover" ; "1L" > >>Sent: Saturday, January 22, 2005 11:25 PM > >>Subject: fsj: Re: wiring harnesses > >> > >> > >> > >>>Last I checked, http://www.zmjeeps.com was doing them up. I have the > > > > stock > > > >>>engine bay harness from a 6 cyl '80 Cherokee that is unmolested I am > > > > going > > > >>>to sell. That is pre-computer BBD carb (last year) > >>> > >>> > >>> > >>>neal wrote: > >>>anybody know of a good source for a cab and/or engine bay wiring harness > >> > >>for > >> > >>>j-trucks? i'd like to get one that has upgraded wire gauges from the > >>>factory originals. > >>>painless?, etc..... > >>> > >>>thanks. > >>> > >>>Neal A. Hoover > >>>Project '76 J-10 > >>>Project '96 XJ > >>>http://community.webshots.com/user/proj96xj > >>> > >>> > >>> > >>> > >>>-- > >>>No virus found in this outgoing message. > >>>Checked by AVG Anti-Virus. > >>>Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 > >>> > >>> > >>>-- > >>>No virus found in this incoming message. > >>>Checked by AVG Anti-Virus. > >>>Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 > >>> > >>> > >> > >> > >> > >> > >>-- > >>No virus found in this outgoing message. > >>Checked by AVG Anti-Virus. > >>Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 > >> > >> > >>-- > >>No virus found in this incoming message. > >>Checked by AVG Anti-Virus. > >>Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 > >> > >> > > > > > > > > > > > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 > > - -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 1/19/05 ------------------------------ End of fsj-digest V1 #2346 **************************