From owner-fsj-digest-at-digest.net Mon Jun 25 22:04:08 2007 From: fsj-digest fsj-digest Tuesday, June 26 2007 Volume 01 : Number 2875 Forum for Discussion of Full Sized SJ Series Jeeps Brian Colucci Digest Coordinator Contents: RE: fsj: BJ's rear slider window for j-trucks RE: fsj: BJ's rear slider window for j-trucks fsj: ok, here's one for car fax FSJ Digest Home Page: http://www.digest.net/jeeps/fsj/ Send submissions to fsj-digest-at-digest.net Send administrative requests to fsj-digest-request-at-digest.net To unsubscribe, include the word unsubscribe by itself in the body of the message, unless you are sending the request from a different address than the one that appears on the list. Include the word help in a message to fsj-digest-request to get a list of other majordomo commands. ---------------------------------------------------------------------- Date: Sun, 24 Jun 2007 20:40:59 -0700 From: "Jim Blair" Subject: RE: fsj: BJ's rear slider window for j-trucks A: First I heard of them! Timely because I'm not sure my new rig has one (guess I need to check the pics from the previous owner) has anybody here purchased and installed one of these windows from BJ's? http://www.bjsoffroad.com/cartgenie/prodInfo.asp?pid=439&cid=8 i have two(2) OEM slider windows in hand right now, but both windows kinda flop around a bit in the tracks, and i'm not so sure they'll seal up to wind and water. i'm curious as to how well these things fit the opening and also if the sliders are any more tightly made than the OEM units. thanks for the info! Neal A. Hoover Project '76 J-10 Project '96 XJ http://community.webshots.com/user/proj96xj _________________________________________________________________ Picture this ^V share your photos and you could win big! http://www.GETREALPhotoContest.com?ocid=TXT_TAGHM&loc=us ------------------------------ Date: Mon, 25 Jun 2007 08:12:47 -0700 From: "Jim Blair" Subject: RE: fsj: BJ's rear slider window for j-trucks A: If anybody wants them, I have 3 of the original 4 pieces of glass from the slider that was in the J4000 (pass side fixed piece was shattered when I kicked the window out to get out of the truck) I think it was a Chev or "universal" slider modded to fit Jtrucks. From: "Neal Hoover" Subject: fsj: BJ's rear slider window for j-trucks has anybody here purchased and installed one of these windows from BJ's? http://www.bjsoffroad.com/cartgenie/prodInfo.asp?pid=439&cid=8 i have two(2) OEM slider windows in hand right now, but both windows kinda flop around a bit in the tracks, and i'm not so sure they'll seal up to wind and water. i'm curious as to how well these things fit the opening and also if the sliders are any more tightly made than the OEM units. thanks for the info! Neal A. Hoover Project '76 J-10 Project '96 XJ http://community.webshots.com/user/proj96xj It^Rs free. http://im.live.com/messenger/im/home/?source=TAGHM_June07 ------------------------------ Date: Mon, 25 Jun 2007 21:57:50 -0700 (PDT) From: john Subject: fsj: ok, here's one for car fax http://www.komoradio.com/news/local/8166972.html blame the dog... anyone looking for a good impala, ...some carpet stains, low mileage... :) actually the car will be fine, it wasn't running... should dry out fine... (car fax operates on FUD - fear uncertainty and doubt... here's a real case... I wonder if this car will ever tell this story via car fax... I DOUBT it... I've have FOUR totalled vehicles that I totalled or bought that way, car fax came back perfect on all of them... one car had been totalled TWICE and scrapped!) john ----- - ---------------------------------------------------------------------- Snohomish, Washington -o|||||o- where Jeeps don't rust, they mold http://freegift.com ** http://wagoneers.com ** - ---------------------------------------------------------------------- ------------------------------ End of fsj-digest V1 #2875 **************************