From owner-fsj-digest-at-digest.net Thu Jul 29 18:24:58 2010 From: fsj-digest fsj-digest Friday, July 30 2010 Volume 01 : Number 3607 Forum for Discussion of Full Sized SJ Series Jeeps Brian Colucci Digest Coordinator Contents: fsj: Jtruck parting near Seattle fsj: Re: Jtruck parting near Seattle fsj: Re: Re: Jtruck parting near Seattle RE: fsj: Re: Re: Jtruck parting near Seattle fsj: Suggested tires? FSJ Digest Home Page: http://www.digest.net/jeeps/fsj/ Send submissions to fsj-digest-at-digest.net Send administrative requests to fsj-digest-request-at-digest.net To unsubscribe, include the word unsubscribe by itself in the body of the message, unless you are sending the request from a different address than the one that appears on the list. Include the word help in a message to fsj-digest-request to get a list of other majordomo commands. ---------------------------------------------------------------------- Date: Mon, 26 Jul 2010 10:08:54 -0700 From: Jim Blair Subject: fsj: Jtruck parting near Seattle I have the 7' box of the '76 J10 almost off and ready to go. It has minimal rust (except where the previous owner took it down to bare metal and let it sit) $200 complete with tailgate and tail lights. Local delivery available. ;) I have a running 258 with Clifford valve cover and non-computerized carb for $150 but I haven't run it for 2 years (I converted the truck to AX-15 and was going to put EFI on it before I got the '82 Honcho) If the title work goes smoothly on the Honcho (I have to contact the lawyer that handled the estate to get a fresh statement from them) I'll sell other parts from the '76 J10 OR maybe put it together with the '88 Chev stepside box I have with the 360/T18A/NP208 from the Honcho as a package deal for $1,000 (some assembly required) Just found out yesterday my current employment has become destabilized and I have to get my place ready for a regular loan so it's all going to go soon that I don't need. (I have to come up with $20,000 to get it ready for a $50,000 total loan in September) Then I can work on building my own shop and energy efficient house (through contractors) Jim Blair, Lynnwood, WA '87 Comanche, '83 Jeep J10, '84 Jeep J10 _________________________________________________________________ The New Busy is not the old busy. Search, chat and e-mail from your inbox. http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL :en-US:WM_HMP:042010_3 ------------------------------ Date: Mon, 26 Jul 2010 14:34:26 -0400 From: "Neal Hoover" Subject: fsj: Re: Jtruck parting near Seattle where were you 3 years ago when i needed a 7' box before i did all the fabbing/fixing on mine!?!? ; ) at least i know now that mine is well rust-protected. Neal A. Hoover Project '76 J-10 Project '96 XJ http://community.webshots.com/user/proj96xj - ----- Original Message ----- From: "Jim Blair" To: "me" Sent: Monday, July 26, 2010 1:08 PM Subject: fsj: Jtruck parting near Seattle >I have the 7' box of the '76 J10 almost off and ready to go. It has minimal > rust (except where the previous owner took it down to bare metal and let > it > sit) $200 complete with tailgate and tail lights. Local delivery > available. > ;) > > I have a running 258 with Clifford valve cover and non-computerized carb > for > $150 but I haven't run it for 2 years (I converted the truck to AX-15 and > was > going to put EFI on it before I got the '82 Honcho) > > If the title work goes smoothly on the Honcho (I have to contact the > lawyer > that handled the estate to get a fresh statement from them) I'll sell > other > parts from the '76 J10 OR maybe put it together with the '88 Chev stepside > box > I have with the 360/T18A/NP208 from the Honcho as a package deal for > $1,000 > (some assembly required) > > Just found out yesterday my current employment has become destabilized and > I > have to get my place ready for a regular loan so it's all going to go soon > that I don't need. (I have to come up with $20,000 to get it ready for a > $50,000 total loan in September) > Then I can work on building my own shop and energy efficient house > (through > contractors) > > Jim Blair, Lynnwood, WA '87 Comanche, '83 Jeep J10, '84 Jeep J10 > > > > _________________________________________________________________ > The New Busy is not the old busy. Search, chat and e-mail from your inbox. > http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL > :en-US:WM_HMP:042010_3 ------------------------------ Date: Tue, 27 Jul 2010 00:05:46 -0400 From: "Neal Hoover" Subject: fsj: Re: Re: Jtruck parting near Seattle it's bitter-sweet, ain't it, Landon? :-/ Neal A. Hoover Project '76 J-10 Project '96 XJ http://community.webshots.com/user/proj96xj - ----- Original Message ----- From: "Tesar Landon-R16884" To: "Neal Hoover" ; ; "FSJ List" Sent: Monday, July 26, 2010 3:31 PM Subject: RE: Re: Jtruck parting near Seattle Ha! I NEED that box, but have no rational idea of how to get it to TX. - - L - -----Original Message----- From: owner-fsj-at-digest.net [mailto:owner-fsj-at-digest.net] On Behalf Of Neal Hoover Sent: Monday, July 26, 2010 1:34 PM To: fsj-at-digest.net; FSJ List Subject: fsj: Re: Jtruck parting near Seattle where were you 3 years ago when i needed a 7' box before i did all the fabbing/fixing on mine!?!? ; ) at least i know now that mine is well rust-protected. Neal A. Hoover Project '76 J-10 Project '96 XJ http://community.webshots.com/user/proj96xj - ----- Original Message ----- From: "Jim Blair" To: "me" Sent: Monday, July 26, 2010 1:08 PM Subject: fsj: Jtruck parting near Seattle >I have the 7' box of the '76 J10 almost off and ready to go. It has minimal > rust (except where the previous owner took it down to bare metal and let > it > sit) $200 complete with tailgate and tail lights. Local delivery > available. > ;) > > I have a running 258 with Clifford valve cover and non-computerized carb > for > $150 but I haven't run it for 2 years (I converted the truck to AX-15 and > was > going to put EFI on it before I got the '82 Honcho) > > If the title work goes smoothly on the Honcho (I have to contact the > lawyer > that handled the estate to get a fresh statement from them) I'll sell > other > parts from the '76 J10 OR maybe put it together with the '88 Chev stepside > box > I have with the 360/T18A/NP208 from the Honcho as a package deal for > $1,000 > (some assembly required) > > Just found out yesterday my current employment has become destabilized and > I > have to get my place ready for a regular loan so it's all going to go soon > that I don't need. (I have to come up with $20,000 to get it ready for a > $50,000 total loan in September) > Then I can work on building my own shop and energy efficient house > (through > contractors) > > Jim Blair, Lynnwood, WA '87 Comanche, '83 Jeep J10, '84 Jeep J10 > > > > _________________________________________________________________ > The New Busy is not the old busy. Search, chat and e-mail from your inbox. > http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL: ON:WL > :en-US:WM_HMP:042010_3 ------------------------------ Date: Mon, 26 Jul 2010 21:12:08 -0700 From: Jim Blair Subject: RE: fsj: Re: Re: Jtruck parting near Seattle Maybe post a CL ad looking for someone deadheading or a light load from Seattle to TX wanting to make some gas (diesel) money? Jim Blair, Lynnwood, WA '87 Comanche, '83 Jeep J10, '84 Jeep J10 > From: proj96xj-at-insightbb.com > To: fsj-at-digest.net; FSJ-List-at-yahoogroups.com > Subject: fsj: Re: Re: Jtruck parting near Seattle > Date: Tue, 27 Jul 2010 00:05:46 -0400 > > it's bitter-sweet, ain't it, Landon? > :-/ > > Neal A. Hoover > Project '76 J-10 > Project '96 XJ > http://community.webshots.com/user/proj96xj > > ----- Original Message ----- > From: "Tesar Landon-R16884" > To: "Neal Hoover" ; ; "FSJ List" > > Sent: Monday, July 26, 2010 3:31 PM > Subject: RE: Re: Jtruck parting near Seattle > > > Ha! I NEED that box, but have no rational idea of how to get it to TX. > > - L > > -----Original Message----- > From: owner-fsj-at-digest.net [mailto:owner-fsj-at-digest.net] On Behalf Of > Neal Hoover > Sent: Monday, July 26, 2010 1:34 PM > To: fsj-at-digest.net; FSJ List > Subject: fsj: Re: Jtruck parting near Seattle > > where were you 3 years ago when i needed a 7' box before i did all the > fabbing/fixing on mine!?!? > ; ) > > at least i know now that mine is well rust-protected. > > Neal A. Hoover > Project '76 J-10 > Project '96 XJ > http://community.webshots.com/user/proj96xj > > ----- Original Message ----- > From: "Jim Blair" > To: "me" > Sent: Monday, July 26, 2010 1:08 PM > Subject: fsj: Jtruck parting near Seattle > > > >I have the 7' box of the '76 J10 almost off and ready to go. It has > minimal > > rust (except where the previous owner took it down to bare metal and > let > > it > > sit) $200 complete with tailgate and tail lights. Local delivery > > available. > > ;) > > > > I have a running 258 with Clifford valve cover and non-computerized > carb > > for > > $150 but I haven't run it for 2 years (I converted the truck to AX-15 > and > > was > > going to put EFI on it before I got the '82 Honcho) > > > > If the title work goes smoothly on the Honcho (I have to contact the > > lawyer > > that handled the estate to get a fresh statement from them) I'll sell > > other > > parts from the '76 J10 OR maybe put it together with the '88 Chev > stepside > > box > > I have with the 360/T18A/NP208 from the Honcho as a package deal for > > $1,000 > > (some assembly required) > > > > Just found out yesterday my current employment has become destabilized > and > > I > > have to get my place ready for a regular loan so it's all going to go > soon > > that I don't need. (I have to come up with $20,000 to get it ready for > a > > $50,000 total loan in September) > > Then I can work on building my own shop and energy efficient house > > (through > > contractors) > > > > Jim Blair, Lynnwood, WA '87 Comanche, '83 Jeep J10, '84 Jeep J10 > > > > > > > > _________________________________________________________________ > > The New Busy is not the old busy. Search, chat and e-mail from your > inbox. > > > http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL: > ON:WL > > :en-US:WM_HMP:042010_3 _________________________________________________________________ The New Busy is not the old busy. Search, chat and e-mail from your inbox. http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL :en-US:WM_HMP:042010_3 ------------------------------ Date: Fri, 30 Jul 2010 01:23:11 +0000 From: dieseljohn-at-comcast.net Subject: fsj: Suggested tires? Would like to hear what tire would be recommended for the 2003 jetta wagon. What works on a jeep or a benz may not work as well on a vw. :). So many options in the 195/65 15 size. Prefer all season, getting a set of used spider-spikes for snow. mainly dealing with wet roads. Thanx John Sent via BlackBerry by AT&T ------------------------------ End of fsj-digest V1 #3607 **************************