Setting up a new disk drive with fdisk, mkfs, mount

1)   fdisk -l
(find new drives...)

2) fdisk /dev/sda
Command (m for help): p

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System

Command (m for help): m
Command action
   a   toggle a bootable flag
   b   edit bsd disklabel
   c   toggle the dos compatibility flag
   d   delete a partition
   l   list known partition types
   m   print this menu
   n   add a new partition
   o   create a new empty DOS partition table
   p   print the partition table
   q   quit without saving changes
   s   create a new empty Sun disklabel
   t   change a partition's system id
   u   change display/entry units
   v   verify the partition table
   w   write table to disk and exit
   x   extra functionality (experts only)

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-60801, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-60801, default 60801):
Using default value 60801

Command (m for help): p

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1       60801   488384001   83  Linux

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.

------------------------------

--> fdisk /dev/sdb
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.


The number of cylinders for this disk is set to 60801.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-60801, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-60801, default 60801):
Using default value 60801

Command (m for help): p

Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1       60801   488384001   83  Linux

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.
                                
--------------------
fdisk -l (extracting new drives only:)

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1       60801   488384001   83  Linux

Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1       60801   488384001   83  Linux

--------------------
------------------------------------------------
--> mkfs.ext3 /dev/sda1
mke2fs 1.39 (29-May-2006)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
61063168 inodes, 122096000 blocks
6104800 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=125829120
3727 block groups
32768 blocks per group, 32768 fragments per group
16384 inodes per group
Superblock backups stored on blocks:
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
        4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
        102400000

Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 33 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
----------------------------------
-->vi /etc/fstab:

/dev/sda1            /S0_500_FILES         ext3   defaults              1 2
/dev/sdb1            /S1_500_FILES         ext3   defaults              1 2

-----------------

-->mount -a

--> df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/hda2             219G  175G   34G  85% /
udev                 1014M  124K 1014M   1% /dev
/dev/hda1             9.8G  4.5G  5.4G  46% /windows/C
/dev/hdd1             280G  269G   11G  97% /300G
/dev/hdb1             280G  267G   14G  96% /FILES
/dev/sda1             459G  201M  435G   1% /S0_500_FILES
/dev/sdb1             459G  201M  435G   1% /S1_500_FILES

------------------------------------------------