SAR(1)									 Linux User's Manual								       SAR(1)


NAME
       sar - Collect, report, or save system activity information.

SYNOPSIS
       sar [ -A ] [ -b ] [ -B ] [ -C ] [ -d ] [ -h ] [ -H ] [ -i interval ] [ -p ] [ -q ] [ -r ] [ -R ] [ -S ] [ -t ] [ -u [ ALL ] ] [ -v ] [ -V ] [ -w ] [ -W ] [ -y
       ] [ -m { keyword [,...] | ALL } ] [ -n { keyword [,...] | ALL } ] [ -I { int [,...] | SUM | ALL | XALL } ] [ -P { cpu [,...] | ALL } ] [ -o [ filename ] |  -f
       [ filename ] ] [ -s [ hh:mm:ss ] ] [ -e [ hh:mm:ss ] ] [ interval [ count ] ]

DESCRIPTION
       The  sar	 command writes to standard output the contents of selected cumulative activity counters in the operating system. The accounting system, based on the
       values in the count and interval parameters, writes information the specified number of times spaced at the specified intervals in seconds.  If	the  interval
       parameter  is  set  to zero, the sar command displays the average statistics for the time since the system was started. If the interval parameter is specified
       without the count parameter, then reports are generated continuously.  The collected data can also be saved in the file specified by the -o filename flag,  in
       addition	 to  being displayed onto the screen. If filename is omitted, sar uses the standard system activity daily data file, the /var/log/sa/sadd file, where
       the dd parameter indicates the current day.  By default all the data available from the kernel are saved in the data file.

       The sar command extracts and writes to standard output records previously saved in a file. This file can be either the one specified by the  -f	flag  or,  by
       default, the standard system activity daily data file.

       Without	the  -P	 flag, the sar command reports system-wide (global among all processors) statistics, which are calculated as averages for values expressed as
       percentages, and as sums otherwise. If the -P flag is given, the sar command reports activity which relates to the specified processor or  processors.  If  -P
       ALL is given, the sar command reports statistics for each individual processor and global statistics among all processors.

       You  can	 select information about specific system activities using flags. Not specifying any flags selects only CPU activity.  Specifying the -A flag selects
       all possible activities.

       The default version of the sar command (CPU utilization report) might be one of the first facilities the user runs to  begin  system  activity  investigation,
       because it monitors major system resources. If CPU utilization is near 100 percent (user + nice + system), the workload sampled is CPU-bound.

       If  multiple  samples  and  multiple reports are desired, it is convenient to specify an output file for the sar command.  Run the sar command as a background
       process. The syntax for this is:

       sar -o datafile interval count >/dev/null 2>&1 &

       All data are captured in binary form and saved to a file (datafile).  The data can then be selectively displayed with the sar command using the -f option. Set
       the  interval  and count parameters to select count records at interval second intervals. If the count parameter is not set, all the records saved in the file
       will be selected.  Collection of data in this manner is useful to characterize system usage over a period of time and determine peak usage hours.

       Note:	 The sar command only reports on local activities.


OPTIONS
       -A     This is equivalent to specifying -bBdHqrRSuvwWy -I SUM -I XALL -m ALL -n ALL -u ALL -P ALL.

       -b     Report I/O and transfer rate statistics.	The following values are displayed:

	      tps
		     Total number of transfers per second that were issued to physical devices.	 A transfer is an I/O request to a physical device. Multiple  logical
		     requests can be combined into a single I/O request to the device.	A transfer is of indeterminate size.

	      rtps
		     Total number of read requests per second issued to physical devices.

	      wtps
		     Total number of write requests per second issued to physical devices.

	      bread/s
		     Total amount of data read from the devices in blocks per second.  Blocks are equivalent to sectors and therefore have a size of 512 bytes.

	      bwrtn/s
		     Total amount of data written to devices in blocks per second.

       -B     Report paging statistics.	 The following values are displayed:

	      pgpgin/s
		     Total number of kilobytes the system paged in from disk per second.

	      pgpgout/s
		     Total number of kilobytes the system paged out to disk per second.

	      fault/s
		     Number  of	 page  faults (major + minor) made by the system per second.  This is not a count of page faults that generate I/O, because some page
		     faults can be resolved without I/O.

	      majflt/s
		     Number of major faults the system has made per second, those which have required loading a memory page from disk.

	      pgfree/s
		     Number of pages placed on the free list by the system per second.

	      pgscank/s
		     Number of pages scanned by the kswapd daemon per second.

	      pgscand/s
		     Number of pages scanned directly per second.

	      pgsteal/s
		     Number of pages the system has reclaimed from cache (pagecache and swapcache) per second to satisfy its memory demands.

	      %vmeff
		     Calculated as pgsteal / pgscan, this is a metric of the efficiency of page reclaim. If it is near 100% then almost every  page  coming  off  the
		     tail  of  the  inactive  list  is being reaped. If it gets too low (e.g. less than 30%) then the virtual memory is having some difficulty.	 This
		     field is displayed as zero if no pages have been scanned during the interval of time.

       -C     When reading data from a file, tell sar to display comments that have been inserted by sadc.

       -d     Report activity for each block device.  When data are displayed, the device specification dev m-n is generally used ( DEV column).  m is the major num-
	      ber  of  the device and n its minor number.  Device names may also be pretty-printed if option -p is used (see below).  Note that disk activity depends
	      on sadc options "-S DISK" and "-S XDISK" to be collected. The following values are displayed:

	      tps
		     Indicate the number of transfers per second that were issued to the device.  Multiple logical requests can be combined into a single I/O request
		     to the device. A transfer is of indeterminate size.

	      rd_sec/s
		     Number of sectors read from the device. The size of a sector is 512 bytes.

	      wr_sec/s
		     Number of sectors written to the device. The size of a sector is 512 bytes.

	      avgrq-sz
		     The average size (in sectors) of the requests that were issued to the device.

	      avgqu-sz
		     The average queue length of the requests that were issued to the device.

	      await
		     The average time (in milliseconds) for I/O requests issued to the device to be served. This includes the time spent by the requests in queue and
		     the time spent servicing them.

	      svctm
		     The average service time (in milliseconds) for I/O requests that were issued to the device. Warning! Do not trust	this  field  any  more.	 This
		     field will be removed in a future sysstat version.

	      %util
		     Percentage of CPU time during which I/O requests were issued to the device (bandwidth utilization for the device). Device saturation occurs when
		     this value is close to 100%.

       -e [ hh:mm:ss ]
	      Set the ending time of the report. The default ending time is 18:00:00. Hours must be given in 24-hour format.  This option can be used when  data  are
	      read from or written to a file (options -f or -o ).

       -f [ filename ]
	      Extract  records	from  filename	(created  by  the  -o filename flag). The default value of the filename parameter is the current daily data file, the
	      /var/log/sa/sadd file. The -f option is exclusive of the -o option.

       -h     Display a short help message then exit.

       -H     Report hugepages utilization statistics.	The following values are displayed:

	      kbhugfree
		     Amount of hugepages memory in kilobytes that is not yet allocated.

	      kbhugused
		     Amount of hugepages memory in kilobytes that has been allocated.

	      %hugused
		     Percentage of total hugepages memory that has been allocated.

       -i interval
	      Select data records at seconds as close as possible to the number specified by the interval parameter.

       -I { int [,...] | SUM | ALL | XALL }
	      Report statistics for a given interrupt.	int is the interrupt number. Specifying multiple -I int parameters on the command line will look at  multiple
	      independent  interrupts.	 The  SUM keyword indicates that the total number of interrupts received per second is to be displayed. The ALL keyword indi-
	      cates that statistics from the first 16 interrupts are to be reported, whereas the XALL keyword indicates that statistics from all interrupts,  includ-
	      ing potential APIC interrupt sources, are to be reported.	 Note that interrupt statistics depend on sadc option "-S INT" to be collected.

       -m { keyword [,...] | ALL }
	      Report power management statistics.  Note that these statistics depend on sadc option "-S POWER" to be collected.

	      Possible keywords are CPU, FAN, FREQ, IN, TEMP and USB.

	      With the CPU keyword, statistics about CPU are reported.	The following value is displayed:

	      MHz
		     Instantaneous CPU clock frequency in MHz.

	      With the FAN keyword, statistics about fans speed are reported.  The following values are displayed:

	      rpm
		     Fan speed expressed in revolutions per minute.

	      drpm
		     This field is calculated as the difference between current fan speed (rpm) and its low limit (fan_min).

	      DEVICE
		     Sensor device name.

	      With the FREQ keyword, statistics about CPU clock frequency are reported.	 The following value is displayed:

	      wghMHz
		     Weighted average CPU clock frequency in MHz.  Note that the cpufreq-stats driver must be compiled in the kernel for this option to work.

	      With the IN keyword, statistics about voltage inputs are reported.  The following values are displayed:

	      inV
		     Voltage input expressed in Volts.

	      %in
		     Relative  input  value.  A	 value	of  100% means that voltage input has reached its high limit (in_max) whereas a value of 0% means that it has
		     reached its low limit (in_min).

	      DEVICE
		     Sensor device name.

	      With the TEMP keyword, statistics about devices temperature are reported.	 The following values are displayed:

	      degC
		     Device temperature expressed in degrees Celsius.

	      %temp
		     Relative device temperature. A value of 100% means that temperature has reached its high limit (temp_max).

	      DEVICE
		     Sensor device name.

	      With the USB keyword, the sar command takes a snapshot of all the USB devices currently plugged into the system. At the end of  the  report,  sar	 will
	      display a summary of all those USB devices.  The following values are displayed:

	      BUS
		     Root hub number of the USB device.

	      idvendor
		     Vendor ID number (assigned by USB organization).

	      idprod
		     Product ID number (assigned by Manufacturer).

	      maxpower
		     Maximum power consumption of the device (expressed in mA).

	      manufact
		     Manufacturer name.

	      product
		     Product name.

       -n { keyword [,...] | ALL }
	      Report network statistics.

	      Possible keywords are DEV, EDEV, NFS, NFSD, SOCK, IP, EIP, ICMP, EICMP, TCP, ETCP, UDP, SOCK6, IP6, EIP6, ICMP6, EICMP6 and UDP6.

	      With the DEV keyword, statistics from the network devices are reported.  The following values are displayed:

	      IFACE
		     Name of the network interface for which statistics are reported.

	      rxpck/s
		     Total number of packets received per second.

	      txpck/s
		     Total number of packets transmitted per second.

	      rxkB/s
		     Total number of kilobytes received per second.

	      txkB/s
		     Total number of kilobytes transmitted per second.

	      rxcmp/s
		     Number of compressed packets received per second (for cslip etc.).

	      txcmp/s
		     Number of compressed packets transmitted per second.

	      rxmcst/s
		     Number of multicast packets received per second.

	      With the EDEV keyword, statistics on failures (errors) from the network devices are reported.  The following values are displayed:

	      IFACE
		     Name of the network interface for which statistics are reported.

	      rxerr/s
		     Total number of bad packets received per second.

	      txerr/s
		     Total number of errors that happened per second while transmitting packets.

	      coll/s
		     Number of collisions that happened per second while transmitting packets.

	      rxdrop/s
		     Number of received packets dropped per second because of a lack of space in linux buffers.

	      txdrop/s
		     Number of transmitted packets dropped per second because of a lack of space in linux buffers.

	      txcarr/s
		     Number of carrier-errors that happened per second while transmitting packets.

	      rxfram/s
		     Number of frame alignment errors that happened per second on received packets.

	      rxfifo/s
		     Number of FIFO overrun errors that happened per second on received packets.

	      txfifo/s
		     Number of FIFO overrun errors that happened per second on transmitted packets.

	      With the NFS keyword, statistics about NFS client activity are reported.	The following values are displayed:

	      call/s
		     Number of RPC requests made per second.

	      retrans/s
		     Number of RPC requests per second, those which needed to be retransmitted (for example because of a server timeout).

	      read/s
		     Number of 'read' RPC calls made per second.

	      write/s
		     Number of 'write' RPC calls made per second.

	      access/s
		     Number of 'access' RPC calls made per second.

	      getatt/s
		     Number of 'getattr' RPC calls made per second.

	      With the NFSD keyword, statistics about NFS server activity are reported.	 The following values are displayed:

	      scall/s
		     Number of RPC requests received per second.

	      badcall/s
		     Number of bad RPC requests received per second, those whose processing generated an error.

	      packet/s
		     Number of network packets received per second.

	      udp/s
		     Number of UDP packets received per second.

	      tcp/s
		     Number of TCP packets received per second.

	      hit/s
		     Number of reply cache hits per second.

	      miss/s
		     Number of reply cache misses per second.

	      sread/s
		     Number of 'read' RPC calls received per second.

	      swrite/s
		     Number of 'write' RPC calls received per second.

	      saccess/s
		     Number of 'access' RPC calls received per second.

	      sgetatt/s
		     Number of 'getattr' RPC calls received per second.

	      With the SOCK keyword, statistics on sockets in use are reported (IPv4).	The following values are displayed:

	      totsck
		     Total number of sockets used by the system.

	      tcpsck
		     Number of TCP sockets currently in use.

	      udpsck
		     Number of UDP sockets currently in use.

	      rawsck
		     Number of RAW sockets currently in use.

	      ip-frag
		     Number of IP fragments currently in queue.

	      tcp-tw
		     Number of TCP sockets in TIME_WAIT state.

	      With  the	 IP  keyword, statistics about IPv4 network traffic are reported.  Note that IPv4 statistics depend on sadc option "-S SNMP" to be collected.
	      The following values are displayed (formal SNMP names between square brackets):

	      irec/s
		     The total number of input datagrams received from interfaces per second, including those received in error [ipInReceives].

	      fwddgm/s
		     The number of input datagrams per second, for which this entity was not their final IP destination, as a result of which an attempt was made  to
		     find a route to forward them to that final destination [ipForwDatagrams].

	      idel/s
		     The total number of input datagrams successfully delivered per second to IP user-protocols (including ICMP) [ipInDelivers].

	      orq/s
		     The total number of IP datagrams which local IP user-protocols (including ICMP) supplied per second to IP in requests for transmission [ipOutRe-
		     quests].  Note that this counter does not include any datagrams counted in fwddgm/s.

	      asmrq/s
		     The number of IP fragments received per second which needed to be reassembled at this entity [ipReasmReqds].

	      asmok/s
		     The number of IP datagrams successfully re-assembled per second [ipReasmOKs].

	      fragok/s
		     The number of IP datagrams that have been successfully fragmented at this entity per second [ipFragOKs].

	      fragcrt/s
		     The number of IP datagram fragments that have been generated per second as a result of fragmentation at this entity [ipFragCreates].

	      With the EIP keyword, statistics about IPv4 network errors are reported.	Note that IPv4 statistics depend on sadc option "-S SNMP"  to  be  collected.
	      The following values are displayed (formal SNMP names between square brackets):

	      ihdrerr/s
		     The  number  of  input datagrams discarded per second due to errors in their IP headers, including bad checksums, version number mismatch, other
		     format errors, time-to-live exceeded, errors discovered in processing their IP options, etc. [ipInHdrErrors]

	      iadrerr/s
		     The number of input datagrams discarded per second because the IP address in their IP header's destination field was not a valid address  to  be
		     received  at  this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For enti-
		     ties which are not IP routers and therefore do not forward datagrams, this counter includes datagrams discarded because the destination  address
		     was not a local address [ipInAddrErrors].

	      iukwnpr/s
		     The  number of locally-addressed datagrams received successfully but discarded per second because of an unknown or unsupported protocol [ipInUn-
		     knownProtos].

	      idisc/s
		     The number of input IP datagrams per second for which no problems were encountered to prevent their continued processing, but  which  were	 dis-
		     carded  (e.g.,  for  lack	of  buffer space) [ipInDiscards].  Note that this counter does not include any datagrams discarded while awaiting re-
		     assembly.

	      odisc/s
		     The number of output IP datagrams per second for which no problem was encountered to prevent their transmission to their destination, but	which
		     were discarded (e.g., for lack of buffer space) [ipOutDiscards].  Note that this counter would include datagrams counted in fwddgm/s if any such
		     packets met this (discretionary) discard criterion.

	      onort/s
		     The number of IP datagrams discarded per second because no route could be found to transmit them to  their	 destination  [ipOutNoRoutes].	 Note
		     that  this counter includes any packets counted in fwddgm/s which meet this 'no-route' criterion.	Note that this includes any datagrams which a
		     host cannot route because all of its default routers are down.

	      asmf/s
		     The number of failures detected per second by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc)  [ipReasmFails].	 Note
		     that this is not necessarily a count of discarded IP fragments since some algorithms can lose track of the number of fragments by combining them
		     as they are received.

	      fragf/s
		     The number of IP datagrams that have been discarded per second because they needed to be fragmented at this  entity  but  could  not  be,	e.g.,
		     because their Don't Fragment flag was set [ipFragFails].

	      With  the	 ICMP  keyword, statistics about ICMPv4 network traffic are reported.  Note that ICMPv4 statistics depend on sadc option "-S SNMP" to be col-
	      lected.  The following values are displayed (formal SNMP names between square brackets):

	      imsg/s
		     The total number of ICMP messages which the entity received per second [icmpInMsgs].  Note that this  counter  includes  all  those  counted  by
		     ierr/s.

	      omsg/s
		     The  total	 number	 of  ICMP  messages  which this entity attempted to send per second [icmpOutMsgs].  Note that this counter includes all those
		     counted by oerr/s.

	      iech/s
		     The number of ICMP Echo (request) messages received per second [icmpInEchos].

	      iechr/s
		     The number of ICMP Echo Reply messages received per second [icmpInEchoReps].

	      oech/s
		     The number of ICMP Echo (request) messages sent per second [icmpOutEchos].

	      oechr/s
		     The number of ICMP Echo Reply messages sent per second [icmpOutEchoReps].

	      itm/s
		     The number of ICMP Timestamp (request) messages received per second [icmpInTimestamps].

	      itmr/s
		     The number of ICMP Timestamp Reply messages received per second [icmpInTimestampReps].

	      otm/s
		     The number of ICMP Timestamp (request) messages sent per second [icmpOutTimestamps].

	      otmr/s
		     The number of ICMP Timestamp Reply messages sent per second [icmpOutTimestampReps].

	      iadrmk/s
		     The number of ICMP Address Mask Request messages received per second [icmpInAddrMasks].

	      iadrmkr/s
		     The number of ICMP Address Mask Reply messages received per second [icmpInAddrMaskReps].

	      oadrmk/s
		     The number of ICMP Address Mask Request messages sent per second [icmpOutAddrMasks].

	      oadrmkr/s
		     The number of ICMP Address Mask Reply messages sent per second [icmpOutAddrMaskReps].

	      With the EICMP keyword, statistics about ICMPv4 error messages are reported.  Note that ICMPv4 statistics depend on sadc option "-S SNMP"	 to  be	 col-
	      lected.  The following values are displayed (formal SNMP names between square brackets):

	      ierr/s
		     The  number of ICMP messages per second which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length,
		     etc.) [icmpInErrors].

	      oerr/s
		     The number of ICMP messages per second which this entity did not send due to problems discovered within ICMP such as a  lack  of  buffers	[icm-
		     pOutErrors].

	      idstunr/s
		     The number of ICMP Destination Unreachable messages received per second [icmpInDestUnreachs].

	      odstunr/s
		     The number of ICMP Destination Unreachable messages sent per second [icmpOutDestUnreachs].

	      itmex/s
		     The number of ICMP Time Exceeded messages received per second [icmpInTimeExcds].

	      otmex/s
		     The number of ICMP Time Exceeded messages sent per second [icmpOutTimeExcds].

	      iparmpb/s
		     The number of ICMP Parameter Problem messages received per second [icmpInParmProbs].

	      oparmpb/s
		     The number of ICMP Parameter Problem messages sent per second [icmpOutParmProbs].

	      isrcq/s
		     The number of ICMP Source Quench messages received per second [icmpInSrcQuenchs].

	      osrcq/s
		     The number of ICMP Source Quench messages sent per second [icmpOutSrcQuenchs].

	      iredir/s
		     The number of ICMP Redirect messages received per second [icmpInRedirects].

	      oredir/s
		     The number of ICMP Redirect messages sent per second [icmpOutRedirects].

	      With the TCP keyword, statistics about TCPv4 network traffic are reported.  Note that TCPv4 statistics depend on sadc option "-S SNMP" to be collected.
	      The following values are displayed (formal SNMP names between square brackets):

	      active/s
		     The number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state per second [tcpActiveOpens].

	      passive/s
		     The number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state per second [tcpPassiveOpens].

	      iseg/s
		     The total number of segments received per second, including those received in error [tcpInSegs].  This count includes segments received on	 cur-
		     rently established connections.

	      oseg/s
		     The  total	 number	 of segments sent per second, including those on current connections but excluding those containing only retransmitted octets
		     [tcpOutSegs].

	      With the ETCP keyword, statistics about TCPv4 network errors are reported.  Note that TCPv4 statistics depend on sadc option "-S SNMP" to be collected.
	      The following values are displayed (formal SNMP names between square brackets):

	      atmptf/s
		     The  number of times per second TCP connections have made a direct transition to the CLOSED state from either the SYN-SENT state or the SYN-RCVD
		     state, plus the number of times per second TCP connections have made a direct transition to the LISTEN state from	the  SYN-RCVD  state  [tcpAt-
		     temptFails].

	      estres/s
		     The number of times per second TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-
		     WAIT state [tcpEstabResets].

	      retrans/s
		     The total number of segments retransmitted per second - that is, the number of TCP segments transmitted containing one or more previously trans-
		     mitted octets [tcpRetransSegs].

	      isegerr/s
		     The total number of segments received in error (e.g., bad TCP checksums) per second [tcpInErrs].

	      orsts/s
		     The number of TCP segments sent per second containing the RST flag [tcpOutRsts].

	      With the UDP keyword, statistics about UDPv4 network traffic are reported.  Note that UDPv4 statistics depend on sadc option "-S SNMP" to be collected.
	      The following values are displayed (formal SNMP names between square brackets):

	      idgm/s
		     The total number of UDP datagrams delivered per second to UDP users [udpInDatagrams].

	      odgm/s
		     The total number of UDP datagrams sent per second from this entity [udpOutDatagrams].

	      noport/s
		     The total number of received UDP datagrams per second for which there was no application at the destination port [udpNoPorts].

	      idgmerr/s
		     The number of received UDP datagrams per second that could not be delivered for reasons other than the lack of an application at the destination
		     port [udpInErrors].

	      With  the	 SOCK6 keyword, statistics on sockets in use are reported (IPv6).  Note that IPv6 statistics depend on sadc option "-S IPV6" to be collected.
	      The following values are displayed:

	      tcp6sck
		     Number of TCPv6 sockets currently in use.

	      udp6sck
		     Number of UDPv6 sockets currently in use.

	      raw6sck
		     Number of RAWv6 sockets currently in use.

	      ip6-frag
		     Number of IPv6 fragments currently in use.

	      With the IP6 keyword, statistics about IPv6 network traffic are reported.	 Note that IPv6 statistics depend on sadc option "-S IPV6" to  be  collected.
	      The following values are displayed (formal SNMP names between square brackets):

	      irec6/s
		     The total number of input datagrams received from interfaces per second, including those received in error [ipv6IfStatsInReceives].

	      fwddgm6/s
		     The number of output datagrams per second which this entity received and forwarded to their final destinations [ipv6IfStatsOutForwDatagrams].

	      idel6/s
		     The total number of datagrams successfully delivered per second to IPv6 user-protocols (including ICMP) [ipv6IfStatsInDelivers].

	      orq6/s
		     The  total	 number	 of  IPv6 datagrams which local IPv6 user-protocols (including ICMP) supplied per second to IPv6 in requests for transmission
		     [ipv6IfStatsOutRequests].	Note that this counter does not include any datagrams counted in fwddgm6/s.

	      asmrq6/s
		     The number of IPv6 fragments received per second which needed to be reassembled at this interface [ipv6IfStatsReasmReqds].

	      asmok6/s
		     The number of IPv6 datagrams successfully reassembled per second [ipv6IfStatsReasmOKs].

	      imcpck6/s
		     The number of multicast packets received per second by the interface [ipv6IfStatsInMcastPkts].

	      omcpck6/s
		     The number of multicast packets transmitted per second by the interface [ipv6IfStatsOutMcastPkts].

	      fragok6/s
		     The number of IPv6 datagrams that have been successfully fragmented at this output interface per second [ipv6IfStatsOutFragOKs].

	      fragcr6/s
		     The number of output datagram fragments that have been generated per second as a result of fragmentation at this output  interface	 [ipv6IfStat-
		     sOutFragCreates].

	      With  the	 EIP6 keyword, statistics about IPv6 network errors are reported.  Note that IPv6 statistics depend on sadc option "-S IPV6" to be collected.
	      The following values are displayed (formal SNMP names between square brackets):

	      ihdrer6/s
		     The number of input datagrams discarded per second due to errors in their IPv6 headers, including version number mismatch, other format  errors,
		     hop count exceeded, errors discovered in processing their IPv6 options, etc. [ipv6IfStatsInHdrErrors]

	      iadrer6/s
		     The  number of input datagrams discarded per second because the IPv6 address in their IPv6 header's destination field was not a valid address to
		     be received at this entity. This count includes invalid addresses (e.g., ::0) and unsupported addresses (e.g., addresses with  unallocated	 pre-
		     fixes).  For  entities  which are not IPv6 routers and therefore do not forward datagrams, this counter includes datagrams discarded because the
		     destination address was not a local address [ipv6IfStatsInAddrErrors].

	      iukwnp6/s
		     The number of locally-addressed datagrams received successfully but discarded per second because of an unknown or unsupported protocol [ipv6IfS-
		     tatsInUnknownProtos].

	      i2big6/s
		     The  number  of  input datagrams that could not be forwarded per second because their size exceeded the link MTU of outgoing interface [ipv6IfS-
		     tatsInTooBigErrors].

	      idisc6/s
		     The number of input IPv6 datagrams per second for which no problems were encountered to prevent their continued processing, but which were	 dis-
		     carded  (e.g., for lack of buffer space) [ipv6IfStatsInDiscards]. Note that this counter does not include any datagrams discarded while awaiting
		     re-assembly.

	      odisc6/s
		     The number of output IPv6 datagrams per second for which no problem was encountered to prevent their  transmission	 to  their  destination,  but
		     which  were  discarded (e.g., for lack of buffer space) [ipv6IfStatsOutDiscards]. Note that this counter would include datagrams counted in fwd-
		     dgm6/s if any such packets met this (discretionary) discard criterion.

	      inort6/s
		     The number of input datagrams discarded per second because no route could be  found  to  transmit	them  to  their	 destination  [ipv6IfStatsIn-
		     NoRoutes].

	      onort6/s
		     The number of locally generated IP datagrams discarded per second because no route could be found to transmit them to their destination [unknown
		     formal SNMP name].

	      asmf6/s
		     The number of failures detected per second by the IPv6 re-assembly algorithm (for whatever reason: timed out, errors,  etc.)  [ipv6IfStatsReasm-
		     Fails].   Note  that this is not necessarily a count of discarded IPv6 fragments since some algorithms can lose track of the number of fragments
		     by combining them as they are received.

	      fragf6/s
		     The number of IPv6 datagrams that have been discarded per second because they needed to be fragmented at this output interface but could not  be
		     [ipv6IfStatsOutFragFails].

	      itrpck6/s
		     The number of input datagrams discarded per second because datagram frame didn't carry enough data [ipv6IfStatsInTruncatedPkts].

	      With  the	 ICMP6 keyword, statistics about ICMPv6 network traffic are reported.  Note that ICMPv6 statistics depend on sadc option "-S IPV6" to be col-
	      lected.  The following values are displayed (formal SNMP names between square brackets):

	      imsg6/s
		     The total number of ICMP messages received by the interface per second which includes all those counted by ierr6/s [ipv6IfIcmpInMsgs].

	      omsg6/s
		     The total number of ICMP messages which this interface attempted to send per second [ipv6IfIcmpOutMsgs].

	      iech6/s
		     The number of ICMP Echo (request) messages received by the interface per second [ipv6IfIcmpInEchos].

	      iechr6/s
		     The number of ICMP Echo Reply messages received by the interface per second [ipv6IfIcmpInEchoReplies].

	      oechr6/s
		     The number of ICMP Echo Reply messages sent by the interface per second [ipv6IfIcmpOutEchoReplies].

	      igmbq6/s
		     The number of ICMPv6 Group Membership Query messages received by the interface per second [ipv6IfIcmpInGroupMembQueries].

	      igmbr6/s
		     The number of ICMPv6 Group Membership Response messages received by the interface per second [ipv6IfIcmpInGroupMembResponses].

	      ogmbr6/s
		     The number of ICMPv6 Group Membership Response messages sent per second [ipv6IfIcmpOutGroupMembResponses].

	      igmbrd6/s
		     The number of ICMPv6 Group Membership Reduction messages received by the interface per second [ipv6IfIcmpInGroupMembReductions].

	      ogmbrd6/s
		     The number of ICMPv6 Group Membership Reduction messages sent per second [ipv6IfIcmpOutGroupMembReductions].

	      irtsol6/s
		     The number of ICMP Router Solicit messages received by the interface per second [ipv6IfIcmpInRouterSolicits].

	      ortsol6/s
		     The number of ICMP Router Solicitation messages sent by the interface per second [ipv6IfIcmpOutRouterSolicits].

	      irtad6/s
		     The number of ICMP Router Advertisement messages received by the interface per second [ipv6IfIcmpInRouterAdvertisements].

	      inbsol6/s
		     The number of ICMP Neighbor Solicit messages received by the interface per second [ipv6IfIcmpInNeighborSolicits].

	      onbsol6/s
		     The number of ICMP Neighbor Solicitation messages sent by the interface per second [ipv6IfIcmpOutNeighborSolicits].

	      inbad6/s
		     The number of ICMP Neighbor Advertisement messages received by the interface per second [ipv6IfIcmpInNeighborAdvertisements].

	      onbad6/s
		     The number of ICMP Neighbor Advertisement messages sent by the interface per second [ipv6IfIcmpOutNeighborAdvertisements].

	      With the EICMP6 keyword, statistics about ICMPv6 error messages are reported.  Note that ICMPv6 statistics depend on sadc option "-S IPV6" to  be	 col-
	      lected.  The following values are displayed (formal SNMP names between square brackets):

	      ierr6/s
		     The  number  of  ICMP  messages  per  second which the interface received but determined as having ICMP-specific errors (bad ICMP checksums, bad
		     length, etc.)  [ipv6IfIcmpInErrors]

	      idtunr6/s
		     The number of ICMP Destination Unreachable messages received by the interface per second [ipv6IfIcmpInDestUnreachs].

	      odtunr6/s
		     The number of ICMP Destination Unreachable messages sent by the interface per second [ipv6IfIcmpOutDestUnreachs].

	      itmex6/s
		     The number of ICMP Time Exceeded messages received by the interface per second [ipv6IfIcmpInTimeExcds].

	      otmex6/s
		     The number of ICMP Time Exceeded messages sent by the interface per second [ipv6IfIcmpOutTimeExcds].

	      iprmpb6/s
		     The number of ICMP Parameter Problem messages received by the interface per second [ipv6IfIcmpInParmProblems].

	      oprmpb6/s
		     The number of ICMP Parameter Problem messages sent by the interface per second [ipv6IfIcmpOutParmProblems].

	      iredir6/s
		     The number of Redirect messages received by the interface per second [ipv6IfIcmpInRedirects].

	      oredir6/s
		     The number of Redirect messages sent by the interface by second [ipv6IfIcmpOutRedirects].

	      ipck2b6/s
		     The number of ICMP Packet Too Big messages received by the interface per second [ipv6IfIcmpInPktTooBigs].

	      opck2b6/s
		     The number of ICMP Packet Too Big messages sent by the interface per second [ipv6IfIcmpOutPktTooBigs].

	      With the UDP6 keyword, statistics about UDPv6 network traffic are reported.  Note that UDPv6 statistics depend on sadc option  "-S  IPV6"	 to  be	 col-
	      lected.  The following values are displayed (formal SNMP names between square brackets):

	      idgm6/s
		     The total number of UDP datagrams delivered per second to UDP users [udpInDatagrams].

	      odgm6/s
		     The total number of UDP datagrams sent per second from this entity [udpOutDatagrams].

	      noport6/s
		     The total number of received UDP datagrams per second for which there was no application at the destination port [udpNoPorts].

	      idgmer6/s
		     The number of received UDP datagrams per second that could not be delivered for reasons other than the lack of an application at the destination
		     port [udpInErrors].

	      The ALL keyword is equivalent to specifying all the keywords above and therefore all the network activities are reported.

       -o [ filename ]
	      Save the readings in the file in binary form. Each reading is in a separate record. The default value of the filename parameter is  the  current	daily
	      data  file,  the	/var/log/sa/sadd file. The -o option is exclusive of the -f option.  All the data available from the kernel are saved in the file (in
	      fact, sar calls its data collector sadc with the option "-S ALL". See sadc(8) manual page).

       -P { cpu [,...] | ALL }
	      Report per-processor statistics for the specified processor or processors.  Specifying the ALL keyword reports statistics for each  individual  proces-
	      sor, and globally for all processors.  Note that processor 0 is the first processor.

       -p     Pretty-print  device  names.  Use	 this  option in conjunction with option -d.  By default names are printed as dev m-n where m and n are the major and
	      minor numbers for the device.  Use of this option displays the names of the devices as they (should) appear in /dev. Name mappings  are  controlled  by
	      /etc/sysstat/sysstat.ioconf.

       -q     Report queue length and load averages. The following values are displayed:

	      runq-sz
		     Run queue length (number of tasks waiting for run time).

	      plist-sz
		     Number of tasks in the task list.

	      ldavg-1
		     System  load  average for the last minute.	 The load average is calculated as the average number of runnable or running tasks (R state), and the
		     number of tasks in uninterruptible sleep (D state) over the specified interval.

	      ldavg-5
		     System load average for the past 5 minutes.

	      ldavg-15
		     System load average for the past 15 minutes.

	      blocked
		     Number of tasks currently blocked, waiting for I/O to complete.

       -r     Report memory utilization statistics.  The following values are displayed:

	      kbmemfree
		     Amount of free memory available in kilobytes.

	      kbmemused
		     Amount of used memory in kilobytes. This does not take into account memory used by the kernel itself.

	      %memused
		     Percentage of used memory.

	      kbbuffers
		     Amount of memory used as buffers by the kernel in kilobytes.

	      kbcached
		     Amount of memory used to cache data by the kernel in kilobytes.

	      kbcommit
		     Amount of memory in kilobytes needed for current workload. This is an estimate of how much RAM/swap is needed to guarantee that there  never  is
		     out of memory.

	      %commit
		     Percentage	 of  memory  needed  for current workload in relation to the total amount of memory (RAM+swap).	 This number may be greater than 100%
		     because the kernel usually overcommits memory.

	      kbactive
		     Amount of active memory in kilobytes (memory that has been used more recently and usually not reclaimed unless absolutely necessary).

	      kbinact
		     Amount of inactive memory in kilobytes (memory which has been less recently used. It is more eligible to be reclaimed for other purposes).

       -R     Report memory statistics. The following values are displayed:

	      frmpg/s
		     Number of memory pages freed by the system per second.  A negative value represents a number of pages allocated by the system.  Note that a page
		     has a size of 4 kB or 8 kB according to the machine architecture.

	      bufpg/s
		     Number of additional memory pages used as buffers by the system per second.  A negative value means fewer pages used as buffers by the system.

	      campg/s
		     Number of additional memory pages cached by the system per second.	 A negative value means fewer pages in the cache.

       -s [ hh:mm:ss ]
	      Set  the	starting  time of the data, causing the sar command to extract records time-tagged at, or following, the time specified. The default starting
	      time is 08:00:00.	 Hours must be given in 24-hour format. This option can be used only when data are read from a file (option -f ).

       -S     Report swap space utilization statistics.	 The following values are displayed:

	      kbswpfree
		     Amount of free swap space in kilobytes.

	      kbswpused
		     Amount of used swap space in kilobytes.

	      %swpused
		     Percentage of used swap space.

	      kbswpcad
		     Amount of cached swap memory in kilobytes.	 This is memory that once was swapped out, is swapped back in but still also is in the swap area  (if
		     memory is needed it doesn't need to be swapped out again because it is already in the swap area. This saves I/O).

	      %swpcad
		     Percentage of cached swap memory in relation to the amount of used swap space.

       -t     When reading data from a daily data file, indicate that sar should display the timestamps in the original locale time of the data file creator. Without
	      this option, the sar command displays the timestamps in the user's locale time.

       -u [ ALL ]
	      Report CPU utilization. The ALL keyword indicates that all the CPU fields should be displayed.  The report may show the following fields:

	      %user
		     Percentage of CPU utilization that occurred while executing at the user level (application). Note that this field includes	 time  spent  running
		     virtual processors.

	      %usr
		     Percentage	 of  CPU  utilization that occurred while executing at the user level (application). Note that this field does NOT include time spent
		     running virtual processors.

	      %nice
		     Percentage of CPU utilization that occurred while executing at the user level with nice priority.

	      %system
		     Percentage of CPU utilization that occurred while executing at the system level (kernel). Note that this field  includes  time  spent  servicing
		     hardware and software interrupts.

	      %sys
		     Percentage	 of CPU utilization that occurred while executing at the system level (kernel). Note that this field does NOT include time spent ser-
		     vicing hardware or software interrupts.

	      %iowait
		     Percentage of time that the CPU or CPUs were idle during which the system had an outstanding disk I/O request.

	      %steal
		     Percentage of time spent in involuntary wait by the virtual CPU or CPUs while the hypervisor was servicing another virtual processor.

	      %irq
		     Percentage of time spent by the CPU or CPUs to service hardware interrupts.

	      %soft
		     Percentage of time spent by the CPU or CPUs to service software interrupts.

	      %guest
		     Percentage of time spent by the CPU or CPUs to run a virtual processor.

	      %idle
		     Percentage of time that the CPU or CPUs were idle and the system did not have an outstanding disk I/O request.

	      Note: On SMP machines a processor that does not have any activity at all (0.00 for every field) is a disabled (offline) processor.

       -v     Report status of inode, file and other kernel tables.  The following values are displayed:

	      dentunusd
		     Number of unused cache entries in the directory cache.

	      file-nr
		     Number of file handles used by the system.

	      inode-nr
		     Number of inode handlers used by the system.

	      pty-nr
		     Number of pseudo-terminals used by the system.

       -V     Print version number then exit.

       -w     Report task creation and system switching activity.

	      proc/s
		     Total number of tasks created per second.

	      cswch/s
		     Total number of context switches per second.

       -W     Report swapping statistics. The following values are displayed:

	      pswpin/s
		     Total number of swap pages the system brought in per second.

	      pswpout/s
		     Total number of swap pages the system brought out per second.

       -y     Report TTY device activity. The following values are displayed:

	      rcvin/s
		     Number of receive interrupts per second for current serial line. Serial line number is given in the TTY column.

	      xmtin/s
		     Number of transmit interrupts per second for current serial line.

	      framerr/s
		     Number of frame errors per second for current serial line.

	      prtyerr/s
		     Number of parity errors per second for current serial line.

	      brk/s
		     Number of breaks per second for current serial line.

	      ovrun/s
		     Number of overrun errors per second for current serial line.


ENVIRONMENT
       The sar command takes into account the following environment variables:


       S_TIME_FORMAT
	      If this variable exists and its value is ISO then the current locale will be ignored when printing the date in the report header.	 The sar command will
	      use the ISO 8601 format (YYYY-MM-DD) instead.


       S_TIME_DEF_TIME
	      If  this	variable exists and its value is UTC then sar will save its data in UTC time (data will still be displayed in local time).  sar will also use
	      UTC time instead of local time to determine the current daily data file located in the /var/log/sa directory. This variable may be useful	 for  servers
	      with users located across several timezones.

EXAMPLES
       sar -u 2 5
	      Report CPU utilization for each 2 seconds. 5 lines are displayed.

       sar -I 14 -o int14.file 2 10
	      Report statistics on IRQ 14 for each 2 seconds. 10 lines are displayed.  Data are stored in a file called int14.file.

       sar -r -n DEV -f /var/log/sa/sa16
	      Display memory and network statistics saved in daily data file 'sa16'.

       sar -A
	      Display all the statistics saved in current daily data file.

BUGS
       /proc filesystem must be mounted for the sar command to work.

       All the statistics are not necessarily available, depending on the kernel version used.	sar assumes that you are using at least a 2.6 kernel.

FILES
       /var/log/sa/sadd
	      Indicate the daily data file, where the dd parameter is a number representing the day of the month.

       /proc contains various files with system statistics.

AUTHOR
       Sebastien Godard (sysstat  orange.fr)

SEE ALSO
       sadc(8), sa1(8), sa2(8), sadf(1), pidstat(1), mpstat(1), iostat(1), vmstat(8)

       http://pagesperso-orange.fr/sebastien.godard/



Linux									       MAY 2011									       SAR(1)


search for:
on the internet, or:
JohnMeister.com-fotos
LinuxMeister-Linux
BibleTech- Bible overview

johnmeister.com/jeep/sj

FULL SIZE JEEPS

JeepMeister
"Jeep is America's
only real sports car."
-Enzo Ferrari


MeisterTech
Diesels +

One Page Overview

Intro to Linux


AMSOIL product guide,
or, AMSOIL web, or 1-800-956-5695,
use customer #283461

Amsoil dealer since 1983
purchase AMSOIL
at Midway Auto on SR9 in Snohomish,
or at Northland Diesel in Bellingham, WA


SJ - 1962-1991

XJ - 1984-2001

WJ - 1999-2004

KJ - 2002-2007

WK - 2005-2010

Find the recommended
AMSOIL synthetics
for your Jeep

CJ-10A - 1984-1986

Jeepsters

MJ - 1984-1992

Willys - 1946-1965

Other Jeeps (FC)