From owner-diesel-benz-digest-at-digest.net Fri Dec 9 08:45:02 2005 From: diesel-benz-digest diesel-benz-digest Friday, December 9 2005 Volume 01 : Number 2043 Forum for Discussion of Diesel Mercedes Benz Automobiles Derick Amburgey Digest Coordinator Contents: Re: [db] Re: 190D in local scrapyard here Re: [db] Re: 190D in local scrapyard here Re: [db] off topic question... RE: [db] Re: 190D in local scrapyard here RE: [db] Re: 190D in local scrapyard here Re: [db] Re: 190D in local scrapyard here RE: [db] Re: 190D in local scrapyard here RE: [db] Re: 190D in local scrapyard here [db] 1979 240D [db] a future tree hugger? Re: [db] a future tree hugger? RE: [db] Re: 190D in local scrapyard here RE: [db] Re: 190D in local scrapyard here Diesel Benz Digest Home Page: http://www.digest.net/diesel-benz/ Send submissions to diesel-benz-digest-at-digest.net Send administrative requests to diesel-benz-digest-request-at-digest.net To unsubscribe, include the word unsubscribe by itself in the body of the message, unless you are sending the request from a different address than the one that appears on the list. Include the word help in a message to stag-digest-request to get a list of other majordomo commands. ---------------------------------------------------------------------- Date: Thu, 8 Dec 2005 17:54:08 +0000 From: Stephen Rigley Subject: Re: [db] Re: 190D in local scrapyard here Good question! Do you have a picture of the type you currently have so I know what not to look for? ;-) Steve On 12/8/05, derick wrote: > Say what kind of heating controls are in the euro models, the automatic > kludge or nice manual dials? > If it is the latter I would be interested in those I would love to do a > conversion to get rid of the exsisting > mouse trap I hav ein mine. > > Thanks > > Derick > > > On 12/8/05, john wrote: > > On Thu, 8 Dec 2005, Stephen Rigley wrote: > > > > >-->Sure, I'll pass it on to the list. > > >-->BTW, remind me, whats the ASD module? > > > > the anti-slip differential part numbers: > > 0085452432 or revised: 0135450132 > > > > john > > > > >-->Steve > > >--> > > >-->On 12/8/05, john wrote: > > >-->> On Wed, 7 Dec 2005, Stephen Rigley wrote: > > >-->> >-->See anything you'd like from it? I could pop over on Saturday > morning > > >-->> >-->and pick it up... it still has the drivers side headlamp (RHD, > > >-->> >-->eurolamps). > > >-->> >-->Steve > > >-->> > > >-->> thanx, can't think of anything I need for mine except the ASD > module, > > >-->> which this probably won't have... > > >-->> > > >-->> feel free to pass this to the list, > > >-->> http://JohnMeister.com/tmp/Merc190.JPG > > >-->> very nice of you to find a parts source like this... I was going > > >-->> to send it to the list and decided that might not be proper. :) > > >-->> > > >-->> Not sure how long I'll leave the picture in the tmp directory. :) > > >-->> > > >-->> john > > >-->> > > >-->> > > >-->> ---- > > >-->> > > >-->> > ------------------------------------------------------------------------- > > >-->> ** http://JohnMeister.com **** http://wagoneers.com ** > > >-->> Snohomish, Washington USA - where Jeeps don't rust, they mold > > >-->> ** http://freegift.net *** > http://greatcom.org/laws/languages.html ** > > >-->> > ------------------------------------------------------------------------- > > >-->> > > >-->> > > >--> > > > > ---- > > > > > ------------------------------------------------------------------------- > > ** http://JohnMeister.com **** http://wagoneers.com ** > > Snohomish, Washington USA - where Jeeps don't rust, they mold > > ** http://freegift.net *** > http://greatcom.org/laws/languages.html ** > > > ------------------------------------------------------------------------- > > > > > > -- > Derick Amburgey > K7DXX ------------------------------ Date: Thu, 8 Dec 2005 09:53:06 -0800 From: derick Subject: Re: [db] Re: 190D in local scrapyard here Say what kind of heating controls are in the euro models, the automatic kludge or nice manual dials? If it is the latter I would be interested in those I would love to do a conversion to get rid of the exsisting mouse trap I hav ein mine. Thanks Derick On 12/8/05, john wrote: > > On Thu, 8 Dec 2005, Stephen Rigley wrote: > > >-->Sure, I'll pass it on to the list. > >-->BTW, remind me, whats the ASD module? > > the anti-slip differential part numbers: > 0085452432 or revised: 0135450132 > > john > > >-->Steve > >--> > >-->On 12/8/05, john wrote: > >-->> On Wed, 7 Dec 2005, Stephen Rigley wrote: > >-->> >-->See anything you'd like from it? I could pop over on Saturday > morning > >-->> >-->and pick it up... it still has the drivers side headlamp (RHD, > >-->> >-->eurolamps). > >-->> >-->Steve > >-->> > >-->> thanx, can't think of anything I need for mine except the ASD > module, > >-->> which this probably won't have... > >-->> > >-->> feel free to pass this to the list, > >-->> http://JohnMeister.com/tmp/Merc190.JPG > >-->> very nice of you to find a parts source like this... I was going > >-->> to send it to the list and decided that might not be proper. :) > >-->> > >-->> Not sure how long I'll leave the picture in the tmp directory. :) > >-->> > >-->> john > >-->> > >-->> > >-->> ---- > >-->> > >-->> > ------------------------------------------------------------------------- > >-->> ** http://JohnMeister.com **** http://wagoneers.com ** > >-->> Snohomish, Washington USA - where Jeeps don't rust, they mold > >-->> ** http://freegift.net *** http://greatcom.org/laws/languages.html** > >-->> > ------------------------------------------------------------------------- > >-->> > >-->> > >--> > > ---- > > ------------------------------------------------------------------------- > ** http://JohnMeister.com **** http://wagoneers.com ** > Snohomish, Washington USA - where Jeeps don't rust, they mold > ** http://freegift.net *** http://greatcom.org/laws/languages.html ** > ------------------------------------------------------------------------- > - -- Derick Amburgey K7DXX ------------------------------ Date: Thu, 08 Dec 2005 21:04:37 +0000 From: john-at-wagoneers.com Subject: Re: [db] off topic question... approvals? approvals? we don't need no steekin' approvals... it's a temporary structure on an easement... albeit an easement that they'll never use and a sturcture I'll probably never remove... but it seems to be ok with all involved... now when I put up walls it might get more involved, but it'll still be temporary, no foundation and it'll be easily removed... also the fact that I'm in the country helps a lot too. -------------- Original message ---------------------- From: "Jim Hoffman" > > -------------- Original message ---------------------- > > From: "Jim Hoffman" > > > > On Thu, 8 Dec 2005, Jim Hoffman wrote: > > > > >--> > > > > >-->> Didn't find much googling... is this one of those kinds of projects > > > > >-->> one avoids? > > > > >--> > > > > >-->LOL!!! I didn't think there WAS a kind of project that you would > > > > >-->avoid!! > > > > >-->Put a diesel in it and be done with it! > > > > >-->;) > > > > >-->Jim > > > > > > > > what, and remove a beautiful straight six flat head engine???? > > > > I don't think so. those old low compression engines are so sweet > sounding... > > > > > > > > john > > > > > > OH! Hey! Don't start getting all logical with me now > > > Mr. Frankendiesel! *I* would leave it stock... YOU would NOT! > > > > > > Who are you and what have you done with John?!?!?!? > > > > > > ;) > > > > > > Jim > > > > > > > ha ha ha haaaa... :) > > > > can you believe it... one project in the carport that will remain > > stock or vintage with the exeption of the engine (the pinto 2L) > > and if I should be lucky enough to snag that '47 Desoto... two... ;) > > > > hey, wait a minute, my benz is stock, except for the MP3 player > > and the cross-drilled powerslotted rotors... :) > > > > I need to extend the carport a bit for the Willys... :) Maybe this weekend. > > > > john > > Extend the carport? This weekend?!?! I don't think you can get > all your approvals and permits for building such a structure before > this weekend! > > ;) > > Jim ------------------------------ Date: Thu, 8 Dec 2005 14:27:37 -0700 From: Subject: RE: [db] Re: 190D in local scrapyard here Stephen, Is the right (passenger side) rear quarter panel (Body) in good shape? It looks like the driver's side is pretty good? Mine has a scrape...although it's minor. R, Scott 1985 Mercedes 190D 2.2 L - -----Original Message----- From: owner-diesel-benz-at-digest.net [mailto:owner-diesel-benz-at-digest.net] On Behalf Of derick Sent: Thursday, December 08, 2005 9:53 AM To: john Cc: Stephen Rigley; diesel-benz list Subject: Re: [db] Re: 190D in local scrapyard here Say what kind of heating controls are in the euro models, the automatic kludge or nice manual dials? If it is the latter I would be interested in those I would love to do a conversion to get rid of the exsisting mouse trap I hav ein mine. Thanks Derick On 12/8/05, john wrote: > > On Thu, 8 Dec 2005, Stephen Rigley wrote: > > >-->Sure, I'll pass it on to the list. > >-->BTW, remind me, whats the ASD module? > > the anti-slip differential part numbers: > 0085452432 or revised: 0135450132 > > john > > >-->Steve > >--> > >-->On 12/8/05, john wrote: > >-->> On Wed, 7 Dec 2005, Stephen Rigley wrote: > >-->> >-->See anything you'd like from it? I could pop over on Saturday > morning > >-->> >-->and pick it up... it still has the drivers side headlamp (RHD, > >-->> >-->eurolamps). > >-->> >-->Steve > >-->> > >-->> thanx, can't think of anything I need for mine except the ASD > module, > >-->> which this probably won't have... > >-->> > >-->> feel free to pass this to the list, > >-->> http://JohnMeister.com/tmp/Merc190.JPG > >-->> very nice of you to find a parts source like this... I was going > >-->> to send it to the list and decided that might not be proper. :) > >-->> > >-->> Not sure how long I'll leave the picture in the tmp directory. :) > >-->> > >-->> john > >-->> > >-->> > >-->> ---- > >-->> > >-->> > ------------------------------------------------------------------------- > >-->> ** http://JohnMeister.com **** http://wagoneers.com ** > >-->> Snohomish, Washington USA - where Jeeps don't rust, they mold > >-->> ** http://freegift.net *** http://greatcom.org/laws/languages.html** > >-->> > ------------------------------------------------------------------------- > >-->> > >-->> > >--> > > ---- > > ------------------------------------------------------------------------- > ** http://JohnMeister.com **** http://wagoneers.com ** > Snohomish, Washington USA - where Jeeps don't rust, they mold > ** http://freegift.net *** http://greatcom.org/laws/languages.html ** > ------------------------------------------------------------------------- > - -- Derick Amburgey K7DXX ------------------------------ Date: Thu, 08 Dec 2005 21:43:21 +0000 From: john-at-wagoneers.com Subject: RE: [db] Re: 190D in local scrapyard here uh... hate to burst your bubble... but "local" is in Ireland... just an FYI. :) not sure you want to pay postage on a fender. :) john -------------- Original message ---------------------- From: > Stephen, > > Is the right (passenger side) rear quarter panel (Body) in good shape? It > looks like the driver's side is pretty good? Mine has a scrape...although > it's minor. > > R, > Scott > 1985 Mercedes 190D 2.2 L ------------------------------ Date: Thu, 8 Dec 2005 23:51:41 +0000 From: Stephen Rigley Subject: Re: [db] Re: 190D in local scrapyard here Heheh whoops ;-) Meant to say that in the original email! I can still look into postage costs tho ... Steve On 12/8/05, john-at-wagoneers.com wrote: > uh... hate to burst your bubble... but "local" is in Ireland... > > just an FYI. :) > > not sure you want to pay postage on a fender. :) > > > john > -------------- Original message ---------------------- > From: > > Stephen, > > > > Is the right (passenger side) rear quarter panel (Body) in good shape? It > > looks like the driver's side is pretty good? Mine has a scrape...although > > it's minor. > > > > R, > > Scott > > 1985 Mercedes 190D 2.2 L ------------------------------ Date: Thu, 8 Dec 2005 21:36:48 -0700 From: Subject: RE: [db] Re: 190D in local scrapyard here That's funny....I was assuming it was Seattle... Never mind about checking on that fender Stephen.... R, Scott - -----Original Message----- From: john-at-wagoneers.com [mailto:john-at-wagoneers.com] Sent: Thursday, December 08, 2005 1:43 PM To: scott_haaland-at-agilent.com; srigley-at-gmail.com Cc: diesel-benz-at-digest.net Subject: RE: [db] Re: 190D in local scrapyard here uh... hate to burst your bubble... but "local" is in Ireland... just an FYI. :) not sure you want to pay postage on a fender. :) john -------------- Original message ---------------------- From: > Stephen, > > Is the right (passenger side) rear quarter panel (Body) in good shape? It > looks like the driver's side is pretty good? Mine has a scrape...although > it's minor. > > R, > Scott > 1985 Mercedes 190D 2.2 L ------------------------------ Date: Thu, 8 Dec 2005 21:23:07 -0800 (PST) From: john Subject: RE: [db] Re: 190D in local scrapyard here On Thu, 8 Dec 2005 scott_haaland-at-agilent.com wrote: >-->That's funny....I was assuming it was Seattle... >-->Never mind about checking on that fender Stephen.... see. :) the world is getting smaller isn't it? :) what happened to your quarter panel? john >--> >-->R, >-->Scott >--> >-->-----Original Message----- >-->From: john-at-wagoneers.com [mailto:john-at-wagoneers.com] >-->Sent: Thursday, December 08, 2005 1:43 PM >-->To: scott_haaland-at-agilent.com; srigley-at-gmail.com >-->Cc: diesel-benz-at-digest.net >-->Subject: RE: [db] Re: 190D in local scrapyard here >--> >-->uh... hate to burst your bubble... but "local" is in Ireland... >--> >-->just an FYI. :) >--> >-->not sure you want to pay postage on a fender. :) >--> >--> >-->john >--> -------------- Original message ---------------------- >-->From: >-->> Stephen, >-->> >-->> Is the right (passenger side) rear quarter panel (Body) in good shape? It >-->> looks like the driver's side is pretty good? Mine has a scrape...although >-->> it's minor. >-->> >-->> R, >-->> Scott >-->> 1985 Mercedes 190D 2.2 L >-->> >--> ---- - ------------------------------------------------------------------------- ** http://JohnMeister.com **** http://wagoneers.com ** Snohomish, Washington USA - where Jeeps don't rust, they mold ** http://freegift.net *** http://greatcom.org/laws/languages.html ** - ------------------------------------------------------------------------- ------------------------------ Date: Thu, 8 Dec 2005 22:03:19 -0800 (PST) From: john Subject: [db] 1979 240D just surfing through craigslist whilst waiting for SuSE 10 to load/update on my laptop and found a '79 240D listed at $4,900. Makes my asking price seem downright cheap... :) http://seattle.craigslist.org/car/116880776.html It does look nice... john ---- - ------------------------------------------------------------------------- ** http://JohnMeister.com **** http://wagoneers.com ** Snohomish, Washington USA - where Jeeps don't rust, they mold ** http://freegift.net *** http://greatcom.org/laws/languages.html ** - ------------------------------------------------------------------------- ------------------------------ Date: Thu, 8 Dec 2005 22:06:27 -0800 (PST) From: john Subject: [db] a future tree hugger? http://www.grum.com/temp/crash.wmv what kind of car was that? ---- - ------------------------------------------------------------------------- ** http://JohnMeister.com **** http://wagoneers.com ** Snohomish, Washington USA - where Jeeps don't rust, they mold ** http://freegift.net *** http://greatcom.org/laws/languages.html ** - ------------------------------------------------------------------------- ------------------------------ Date: Fri, 9 Dec 2005 10:03:18 +0000 From: Stephen Rigley Subject: Re: [db] a future tree hugger? hmmm... I reckon its either an MG ZR or a Peugeot 306 ... On 12/9/05, john wrote: > http://www.grum.com/temp/crash.wmv > > what kind of car was that? > > ---- > > ------------------------------------------------------------------------- > ** http://JohnMeister.com **** http://wagoneers.com ** > Snohomish, Washington USA - where Jeeps don't rust, they mold > ** http://freegift.net *** http://greatcom.org/laws/languages.html ** > ------------------------------------------------------------------------- ------------------------------ Date: Fri, 09 Dec 2005 11:20:40 -0500 From: "Jim Hoffman" Subject: RE: [db] Re: 190D in local scrapyard here What, like Seattle is the center of the universe or something?!?! EVERYTHING has to happen in Seattle?!?! ;) I'm still ticked that Paul Allen stoll Mike Holmgren away from our Packers! ;) Jim > That's funny....I was assuming it was Seattle... > > Never mind about checking on that fender Stephen.... > > R, > Scott > > -----Original Message----- > From: john-at-wagoneers.com [mailto:john-at-wagoneers.com] > Sent: Thursday, December 08, 2005 1:43 PM > To: scott_haaland-at-agilent.com; srigley-at-gmail.com > Cc: diesel-benz-at-digest.net > Subject: RE: [db] Re: 190D in local scrapyard here > > uh... hate to burst your bubble... but "local" is in Ireland... > > just an FYI. :) > > not sure you want to pay postage on a fender. :) > > > john > -------------- Original message ---------------------- > From: > > Stephen, > > > > Is the right (passenger side) rear quarter panel (Body) in good shape? It > > looks like the driver's side is pretty good? Mine has a scrape...although > > it's minor. > > > > R, > > Scott > > 1985 Mercedes 190D 2.2 L ------------------------------ Date: Fri, 9 Dec 2005 09:29:42 -0700 From: Subject: RE: [db] Re: 190D in local scrapyard here John, Have you been drinking that biodiesel?? It was scraped up when I bought it from you, so I guess the question goes back to you. R, Scott - -----Original Message----- From: john [mailto:john-at-superdawg.wagoneers.com] Sent: Thursday, December 08, 2005 9:23 PM To: scott_haaland-at-agilent.com Cc: srigley-at-gmail.com; diesel-benz-at-digest.net Subject: RE: [db] Re: 190D in local scrapyard here On Thu, 8 Dec 2005 scott_haaland-at-agilent.com wrote: >-->That's funny....I was assuming it was Seattle... >-->Never mind about checking on that fender Stephen.... see. :) the world is getting smaller isn't it? :) what happened to your quarter panel? john >--> >-->R, >-->Scott >--> >-->-----Original Message----- >-->From: john-at-wagoneers.com [mailto:john-at-wagoneers.com] >-->Sent: Thursday, December 08, 2005 1:43 PM >-->To: scott_haaland-at-agilent.com; srigley-at-gmail.com >-->Cc: diesel-benz-at-digest.net >-->Subject: RE: [db] Re: 190D in local scrapyard here >--> >-->uh... hate to burst your bubble... but "local" is in Ireland... >--> >-->just an FYI. :) >--> >-->not sure you want to pay postage on a fender. :) >--> >--> >-->john >--> -------------- Original message ---------------------- >-->From: >-->> Stephen, >-->> >-->> Is the right (passenger side) rear quarter panel (Body) in good shape? It >-->> looks like the driver's side is pretty good? Mine has a scrape...although >-->> it's minor. >-->> >-->> R, >-->> Scott >-->> 1985 Mercedes 190D 2.2 L >-->> >--> ---- - ------------------------------------------------------------------------- ** http://JohnMeister.com **** http://wagoneers.com ** Snohomish, Washington USA - where Jeeps don't rust, they mold ** http://freegift.net *** http://greatcom.org/laws/languages.html ** - ------------------------------------------------------------------------- ------------------------------ End of diesel-benz-digest V1 #2043 **********************************