From owner-diesel-benz-digest@digest.net Mon Jan 4 10:05:37 2010 From: diesel-benz-digest diesel-benz-digest Monday, January 4 2010 Volume 01 : Number 3207 Forum for Discussion of Diesel Mercedes Benz Automobiles Derick Amburgey Digest Coordinator Contents: [db] new day with the 4.0L, last day of the year... [db] 4.0L swap... stopped... time for a WVO run... need my J10 [db] happy new year Re: [db] happy new year [db] administrivia: notes on using this list [db] Re: FW: 1926 Snow Tractor "Neat"-one of Henry's toys Diesel Benz Digest Home Page: http://www.digest.net/diesel-benz/ Send submissions to diesel-benz-digest@digest.net Send administrative requests to diesel-benz-digest-request@digest.net To unsubscribe, include the word unsubscribe by itself in the body of the message, unless you are sending the request from a different address than the one that appears on the list. Include the word help in a message to stag-digest-request to get a list of other majordomo commands. ---------------------------------------------------------------------- Date: Thu, 31 Dec 2009 11:12:45 -0800 (PST) From: diesel john Subject: [db] new day with the 4.0L, last day of the year... heading out to move that 4.0L just a few inches and hopefully get it installed today... in the meantime, remember that 1,210lb block of steel that came out of my tug last year? http://wagoneers.com/FSJ/rigs/1986-CJ10A/2008_Dec_29_bed_n_ballast_removal/P1080701.jpg http://wagoneers.com/FSJ/rigs/1986-CJ10A/2008_Dec_29_bed_n_ballast_removal/P1080702.jpg just sold it on craigslist to a blacksmith for $300. not sure what scrap metal is right now, but half a ton wouldn't bring $300 even at the best rates. the guy will make it a large surface anvil... which is what my son and I would have done had I solid enough ground to set something like that... it would have surely toppled over after sinking into the fill that my shop is built on. :) the guy is coming over tonight, so I better have that engine in by then... heading out right now. wishing you all a very happy new year... john http://wagoneers.com/WJ/tech/WJ-4.0L-swap/ALL.html so close, just a few degrees rotation to the left, and back a bit: http://wagoneers.com/WJ/tech/WJ-4.0L-swap/P1110285.jpg ----- - ------------------------------------------------------------------------ Snohomish, Washington -o|||||o- where Jeeps don't rust, they mold http://AMSOIL.com/redirect.cgi?zo=283461 http://creationwiki.org http://johnmeister.com http://wagoneers.com http://fotomeister.us - ------------------------------------------------------------------------ ------------------------------ Date: Thu, 31 Dec 2009 18:08:54 -0800 (PST) From: john Subject: [db] 4.0L swap... stopped... time for a WVO run... need my J10 I've officially stopped working on the WJ... :) it's going to the shop next week on a hook, flatbed or tow dolly... have it so close... three of us couldn't get it... we have one bolt started, one motor mount started... but things are so cockeyed in there the shop will likely remove everything and start over. the uniframe on the wj and xj doesn't allow for easy stuff like that Joe... :) so, I have everything tied up, tools packed away... It may need the manifolds swapped too. Not sure, but the exhaust pipes may be further back on the WJ than on the Rubicon... have all the stuff for both engines so it's not a worry. Shouldn't cost as much to have it finished up as having them do the entire thing... we'll see... don't care at this point. :) I was going to get some stuff done on the XJ before the break was over... not sure what will be open on Saturday... need to make a WVO run now... dang, don't have a truck... guess I'll use garbage bags over the buckets in the trunk of the benz..... curtis, hurry up, need my J10 finished... :) john ----- - ------------------------------------------------------------------------ Snohomish, Washington -o|||||o- where Jeeps don't rust, they mold http://AMSOIL.com/redirect.cgi?zo=283461 http://creationwiki.org http://johnmeister.com http://wagoneers.com http://fotomeister.us - ------------------------------------------------------------------------ On Thu, 31 Dec 2009, Joe Hughes wrote: # Can you get a ratcheting nylon strap around the tail end of the trans to # help with leveling it? Of course it helps if you have a frame to attach the # straps to, which seem to be missing on the xj. # # Joe H. # Everett, WA # # -----Original Message----- # From: owner-fsj@digest.net [mailto:owner-fsj@digest.net] On Behalf Of john # Sent: Thursday, December 31, 2009 10:31 AM # To: Kevin # Cc: Dan Black; Full Size Jeeps # Subject: Re: fsj: RE: xj: 4.0L swap... so close... need help... # # I am not looking forward to the last couple inches. # ------------------------------ Date: Thu, 31 Dec 2009 18:30:18 -0800 (PST) From: diesel john Subject: [db] happy new year wishing all my gear head friends a very happy new year... may all your projects go well in the next year... keep the popcorn fresh, that reminds me, I'm out of popcorn... :) john current status: - - 83 J10 step side - not together yet... but NEED it desperately... come on Curtis!!! - - 91 300D - needs new alarm system remote or system swapped out...has new glow plug (hand still sore) - - 99 WJ - working well, but needs a heater core at some point - - 75 j10 hydraulic trailer, needs new battery, filled with composted topsoil... - - 86 cj-10a - SOLD on Monday! - just sold the ballast for $300 to a blacksmith... - - 89 xj - waiting for the title, needs windshield, stereo and some TLC, once my J10 is done - for sale - - 00 WJ - oh so close to having the new engine in... hauling it to the shop next week, for sale soon ----- - ------------------------------------------------------------------------ Snohomish, Washington -o|||||o- where Jeeps don't rust, they mold http://AMSOIL.com/redirect.cgi?zo=283461 http://creationwiki.org http://johnmeister.com http://wagoneers.com http://fotomeister.us - ------------------------------------------------------------------------ ------------------------------ Date: Thu, 31 Dec 2009 22:22:12 -0800 (PST) From: diesel john Subject: Re: [db] happy new year you're welcome Marc, but it's Richard Welty we all need to thanx. I asked for the FSJ and XJ and Diesel-Benz lists back in 1997... and he provided them and all these years of outstanding service! Bravo Richard! Hope your new year is great! thanx for the FSJ and XJ lists as well... AND the IH list and the BMW list... john ----- - ------------------------------------------------------------------------ Snohomish, Washington -o|||||o- where Jeeps don't rust, they mold http://AMSOIL.com/redirect.cgi?zo=283461 http://creationwiki.org http://johnmeister.com http://wagoneers.com http://fotomeister.us - ------------------------------------------------------------------------ On Fri, 1 Jan 2010, Marc Z wrote: # Hello John, # # Wishing you and yours a Happy New Year. Thanks for providing this list # service. # # Regards, Marc Zylka in NC. # # # diesel john wrote: # > wishing all my gear head friends a very happy new year... # > may all your projects go well in the next year... # > keep the popcorn fresh, that reminds me, I'm out of popcorn... :) # > # > john # > # > current status: # > # > - 83 J10 step side - not together yet... but NEED it desperately... come on # > Curtis!!! # > # > - 91 300D - needs new alarm system remote or system swapped out...has new # > glow plug (hand still sore) # > - 99 WJ - working well, but needs a heater core at some point # > - 75 j10 hydraulic trailer, needs new battery, filled with composted # > # > - 86 cj-10a - SOLD on Monday! - just sold the ballast for $300 to a # > blacksmith... # > - 89 xj - waiting for the title, needs windshield, stereo and some TLC, # > once my J10 is done - for sale # > - 00 WJ - oh so close to having the new engine in... hauling it to the shop # > next week, for sale soon ------------------------------ Date: Fri, 01 Jan 2010 06:45:01 +0000 From: Richard Welty Subject: [db] administrivia: notes on using this list Digest.Net mailing list "Meta FAQ" These general notes on using Digest.Net mailing lists are posted on the 1st and 15th of each month. This file may be found on the web at http://www.digest.net/general-notes.txt [last revised 5/1/02; removed list of spam strings, as i'm not the only one filtering on them -- rpw] Additional information on Digest.Net's spam policies may be found at http://www.digest.net/email-policy.html and http://www.digest.net/blocked.html Table of Contents 1. Why don't my postings go through? 2. Why can't I unsubscribe? 3. How do I post to the list? 4. Where are the archives? 5. What other lists are on digest.net? 6. Is there a web subscription form? 7. Why not move the lists to someplace like (egroups, topica,...)? 8. How do I contact the server adminstrator in an emergency? 9. What is Krusty Motorsports, anyway? The Meta-FAQ 1. Why don't my postings go through? There are several things that may interfere with postings making it to the list. a) Are you a member? Some read the ftp archives rather than receiving the list in email. Persons who read the list via email are automatically members, but readers of the FTP archive are not, and need to contact me (rwelty@krusty-motorsports.com) and get your name added to the list of "permitted senders". b) has your email address changed? some of you have had changes in your email address. your old address still works, and is still on the list, but your From: line shows a new address. this can happen for various reasons; you may have changed jobs or ISPs, and left a forward in place, or your IT staff may have fiddled with the email system. you will need to unsubscribe your old email address and subscribe the new one. this may require my involvement, if you can't figure out a way to get your old address off the list using the conventional majordomo commands. you can use the majordomo "which" command to probe for old addresses. send a message to majordomo@digest.net with one or more which commands in the body, one per line. to check for potential addresses for Fred Flinstone, formerly of bedrock.org, the following commands can be sent: which flintstone which bedrock note that the matches above might return any of the following addresses, if they appear in the list (in other words, you can use vagueness and incompleteness in your recollection as a tool): Fred.Flinstone@bedrock.org fflinstone@wilma.bedrock.org flintstonef@bedrock.com c) do you have more than one email address? if so, only the subscribed addresses can post, unless you contact me (see 1.a) above for relevant information) d) are you using (intentionally or accidentially) special "features" of your mail client? [this section is no longer operative, as the demime software now strips html, attachments, rich text format, etc. from postings automatically.] e) are your posts too large? there is a 10,000 character limit on posting sizes; this is done for various reasons. you can always split up large postings to get mail through. f) are you including majordomo commands at the start of your message? administrivia control is turned on; this is a trap for things like "unsubscribe" at the start of a message. try to avoid obvious majordomo commands in the subject and the first 10 lines, or misspell them in obvious ways (e.g. unzubscribe, 1ndex, h3lp, g3t, etc.) g) are you triggering spam traps? some things are red flags; for example, many phrases found commonly in spam are automatically blocked. h) are you using "funky" character sets? [7 bit restriction lifted experimentally on 8/2/00 -- film at 11] unfortunately, there are "issues" if i permit any character set other than old fashioned 7 level ASCII; therefore, you need to avoid national character sets that include various accents, umlauts, national currency characters such as the British pound symbol, etc. i) are you unintentionally including complete digests in your reply? You need to check and make sure you cut down replys to the minimal size; digests are between 20,000 and 25,000 characters in length, and if you include a complete digest in your reply, it clearly won't make the 10,000 character limit. By the way, this feature is intentional. j) Are you using a "bad" ISP or mail relay? See http://www.digest.net/email-policy.html for more information about Digest.Net policies about email. k) Is the error message you get back "User Unknown"? If so, you may be running afoul of spam control severices (again, see http://www.digest.net/email-policy.html) When these services register a hit, the error code 550 is returned. 550 is a generic code that many broken mail systems report as "user unknown". The "rejectlog" entries for the previous day's mail traffic on digest.net may be viewed at http://www.digest.net/rejectlog.01 Some of you may find it useful or instructive to use the telnet program to connect directly to port 25 on krusty-motorsports.com and see what kind of reply you get; this requires some technical knowledge and is not for everyone (you can get out of this at anytime after the initial banner simply by typing quit and hitting enter.) l) Is SMTP over TLS involved? This is a bit esoteric, but as of 8/8/01 the digest.net mail server will attempt to use "TLS" (Transport Layer Security) for outbound mail if the destination mail server offers it. SMTP over TLS is fairly new technology, and a bit buggy. I am monitoring the logs on the server, and when I see TLS related problems, I manually place the problem destinations on a special exception list; however, this may delay email to the destination host until I make the exception. 2. Why can't I unsubscribe? a) are you using the right address? send to majordomo@digest.net, and the command format is unsubscribe list-name my-email-address b) has your email address changed? majordomo has no way of knowing that Fred.Flinstone@BarneyCo.com was once fflintstone@bedrock.org. you can check this with the which command (see 1.b) above for details) 3. How do I post to the list? You may use either one of two addresses: for example, the bmw-digest may be reached using either bmw@digest.net or bmw-digest@digest.net If you are using the correct addresses and your posts don't show up, check out the stuff in 1. above. 4. Where are the archives? see ftp://ftp.digest.net/ for digest archives. the web archives have proven problematic, and are awaiting time for a systematic attack on the problems they've been having. 5. What other lists are on digest.net? see http://www.digest.net/ for more information. 6. Is there a web subscription form? Yes, recently added. go to http://www.digest.net/bin/digest-subs.cgi 7. Why not move the lists to someplace like (egroups, topica,...)? The Krusty Motorsports server (aka, digest.net) was explicitly to provide for efficient management of the various automotive mailing lists, done the way that the owner of the server wanted it done. Any migration off of the server (which is already bought, paid for, and configured) would create any number of issues. 8. How do i contact the Server Administrator in an emergency? If my regular email address (rwelty@krusty-motorsports.com) isn't working for you, you can fall back on rwelty@suespammers.org 9. What is Krusty Motorsports, anyway? Krusty Motorsports (http:/www.krusty-motorsports.com/) is a business which is owned and operated by Richard Welty (rwelty@krusty-motorsports.com). Krusty is an S-Corporation in the State of New York. Krusty provides a number of Internet related services, such as mailing list, web sites, pop3/telnet accounts, and consulting on internet related issues. For more information, see the web site. ------------------------------ Date: Mon, 4 Jan 2010 10:05:15 -0800 (PST) From: john Subject: [db] Re: FW: 1926 Snow Tractor "Neat"-one of Henry's toys very cool, wonder if we could set something like this up on a modern vehicle... :) those open chains and gears in the back could be a public safety issue though... wonder how fast this thing could really go, and if it could run on hard surfaces at all... http://forum.treasurenet.com/index.php/topic,213971.0/topicseen.html john ----- - ------------------------------------------------------------------------ Snohomish, Washington -o|||||o- where Jeeps don't rust, they mold http://AMSOIL.com/redirect.cgi?zo=283461 http://creationwiki.org http://johnmeister.com http://wagoneers.com http://fotomeister.us - ------------------------------------------------------------------------ On Mon, 4 Jan 2010, Thorndike, Doug wrote: # I can see your mind working on this one already! # Regards -- # # Doug Thorndike Sent: Monday, January 04, 2010 9:13 AM Subject: 1926 Snow Tractor "Neat"-one of Henry's toys This was 83 years ago... This is a rare video of an invention that never went very far. Wait until you see the automobile version it is all on here. 1926 Snow Tractor. Talk about ingenuity! This is a 1926 silent film (on video) of a tractor-snow-machine invented by Henry Ford, shown here driving it. Watch the whole thing. Note the "hat." http://forum.treasurenet.com/index.php/topic,213971.0/topicseen.html ------------------------------ End of diesel-benz-digest V1 #3207 **********************************